LICAL-ENC-HS001 Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – HS SERIES DECODER DATA GUIDE

HIGH SECURITY
HS SERIES
WIRELESS MADE SIMPLE ^®
DECODER
HS SERIES DECODER DATA GUIDE
®
DESCRIPTION
HS Series encoders and decoders are
designed for maximum security remote
control applications. Together, they allow
the status of up to eight buttons or contacts
to be transferred via a highly secure
encrypted transmission intended for
wireless links. The HS Series uses
CipherLinx™ technology, which is based
on the Skipjack algorithm developed by the
U.S. National Security Agency (NSA) and
has been independently evaluated by ISE.
CipherLinx™ never sends or accepts the
same data twice, never loses sync, and
changes codes on every packet, not just
every button press. In addition to state-of-
the-art security, the tiny 20-pin SSOP
packaged parts also offer innovative
features, including up to 8 data lines,
multiple baud rates, individual “button
level” permissions, keypad user PIN,
encoder identity output at the decoder, low
power consumption, and easy setup.
CipherLinx
Technology
0.026
(0.65)
EVALUATED
0.309
(7.85)
0.207 (5.25)
0.013
(0.32)
0.007
(0.18)
Figure 1: Package Dimensions
RoHS
COMPLIAN _T
0.284
(7.20)
0.030
(0.75)
FEATURES
APPLICATIONS INCLUDE
„ CipherLinx™ security technology „ Keyless Entry / Access Control
„ ISE evaluated
„ Door and Gate Openers
„ Never sends the same packet twice „ Security Systems
„ Never loses sync
„ Remote Device Control
„ PIN-protected encoder access
„ Car Alarms / Starters
„ 8 selectable data lines
„ Home / Industrial Automation
„ “Button level” permissions
„ Remote Status Monitoring
„ Encoder ID available at decoder
„ Wide 2.0 to 5.5V operating voltage _{ORDERING INFORMATION}
„ Low supply current (370µA @ 3V) _{PART #}
„ Ultra-low 0.1µA sleep current
LICAL-ENC-HS001
DESCRIPTION
HS Encoder
„ Selectable baud rates
LICAL-DEC-HS001 HS Decoder
„ No programmer required
MDEV-LICAL-HS
HS Master Development System
„ Small SMD package
HS encoders are shipped on reels of 1,600
Patents Pending
Revised 1/28/08