LI0805H151R-00 Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers –
Low Current Ferrie Chip Beads

Low Current
Ferrite Chip Beads
Steward’s surface mount ferrite chips provide compact, cost effective
EMI filtering for densely packed PCB designs. The small footprint
enables placement very close to troublesome high frequency devices.
Our proprietary SMT construction yields rugged components with
superior impedance vs. frequency characteristics.
Features:
·Small footprint ·Excellent retention under Bias ·Rugged, monolithic construction ·Superior impedance vs. frequency characteristics
·Economical ·Broad range of sizes (from 0402 up to 1812) ·Broad range of impedance values and current ratings
Application:
·Filtering of power input pins and devices using high speed clocks ·Filtering of low frequency input/output signals of shielded
enclosures ·High frequency filtering of medium speed clocks and video signals ·Preventing oscillations in high frequency amplifiers
·Data bus filtration ·Discrete component filtration in power supplies
Test Specifications:
·Maximum current ratings are determined by testing to a maximum temperature rise of 40⁰ C with continuous operating current
·Board level components are rated up to a maximum of 75 volts
Tested with: ·HP4396A (100KHz - 1.8 GHz) or HP8753 (to 6 GHz) Network/Spectrum Analyzer ·HP43961A Impedance Test Kit
·HP16192A Test Fixture or Inter-Continental Microwave custom fixtures ·HP16200A DC Bias Adapter ·Philips PM2811 DC Power
Supply ·Ambient Temperature 23.5^oC + 2^o ·Bandwidth 3 kHz ·Sweep Time 423 ms ·Impedance is rated at + 25% @100MHz
PART NUMBERING SYSTEM
A
LI
0402
E
300
R
-
00
PRODUCT
SERIES CODE
PART
SIZE CODE
RATED
IMPEDANCE PACKAGING ADDITIONAL PART
CURRENT CODE VALUE CODE CODE
DESCRIPTION
Ambient Operating Temperature Range: -55° C to +125° C
PART
NUMBER
A
mm
(inches)
B
mm
(inches)
C
mm
(inches)
D
mm
(inches)
IMPEDANCE ( Z )
TYPICAL OHMS @
100MHz 500MHz 1GHz
LI0402E300R-00
1.01 + 0.18
(0.040 + 0.007)
0.50 + 0.20
(0.020 + 0.008)
0.50 + 0.20
(0.020 + 0.008)
0.30 MAX
(0.012 MAX)
30
65
68
* ^{LI0402E600R-00}
1.01 + 0.18
(0.040 + 0.007)
0.50 + 0.20
(0.020 + 0.008)
0.50 + 0.20
(0.020 + 0.008)
0.30 MAX
(0.012 MAX)
60
90
93
LI0402D121R-00
1.01 + 0.18
(0.040 + 0.007)
0.50 + 0.20
(0.020 + 0.008)
0.50 + 0.20
(0.020 + 0.008)
0.30 MAX
(0.012 MAX)
120
175
164
LI0402B301R-00
1.01 + 0.18
(0.040 + 0.007)
0.50 + 0.20
(0.020 + 0.008)
0.50 + 0.20
(0.020 + 0.008)
0.30 MAX
(0.012 MAX)
300
454
351
LI0603G800R-00
1.60 + 0.15
0.80 + 0.15
(0.063 + 0.006) (0.031 + 0.006)
0.80 + 0.15
(0.031 + 0.006)
0.36 + 0.15
(0.014 + 0.006)
80
120
107
LI0603G121R-00
1.60 + 0.15
0.80 + 0.15
(0.063 + 0.006) (0.031 + 0.006)
0.80 + 0.15
(0.031 + 0.006)
0.36 + 0.15
(0.014 + 0.006)
120
156
113
* ^{LI0603E151R-00}
1.60 + 0.15
0.80 + 0.15
(0.063 + 0.006) (0.031 + 0.006)
0.80 + 0.15
(0.031 + 0.006)
0.36 + 0.15
(0.014 + 0.006)
150
205
160
LI0603G221R-00
1.60 + 0.15
0.80 + 0.15
(0.063 + 0.006) (0.031 + 0.006)
0.80 + 0.15
(0.031 + 0.006)
0.36 + 0.15
(0.014 + 0.006)
220
279
168
LI0603D301R-00
1.60 + 0.15
0.80 + 0.15
(0.063 + 0.006) (0.031 + 0.006)
0.80 + 0.15
(0.031 + 0.006)
0.36 + 0.15
(0.014 + 0.006)
300
286
165
LI0805H400R-00
2.00 + 0.20
1.25 + 0.20
(0.079 + 0.008) (0.049 + 0.008)
0.90 + 0.20
(0.035 + 0.008)
0.51 + 0.25
(0.020 + 0.010)
40
60
63
LI0805H600R-00
2.00 + 0.20
1.25 + 0.20
(0.079 + 0.008) (0.049 + 0.008)
0.90 + 0.20
(0.035 + 0.008)
0.51 + 0.25
(0.020 + 0.010)
60
78
75
* ^{LI0805H750R-00}
1.60 + 0.15
0.80 + 0.15
(0.063 + 0.006) (0.031 + 0.006)
0.80 + 0.15
(0.031 + 0.006)
0.36 + 0.15
(0.014 + 0.006)
75
115
115
LI0805H800R-00
1.60 + 0.15
0.80 + 0.15
(0.063 + 0.006) (0.031 + 0.006)
0.80 + 0.15
(0.031 + 0.006)
0.36 + 0.15
(0.014 + 0.006)
80
115
100
DCR
MAX
OHMS
RATED I MAX
(continuous)
mA
0.300
500
0.300
500
0.400
400
0.800
200
0.200
700
0.200
700
0.250
500
0.300
700
0.350
400
0.150
800
0.150
800
0.150
800
0.2
700
B
C
D
42