LED1-MOD1-3-10 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – THE UNIQUE LED-BASED DTECTION AND RANGING TECHNOLOGY

Leddar^™One:
Innovation in the Palm of Your Hand
The Leddar™One Sensing Module brings a whole new dimension
to your innovation, adding valuable sensing intelligence to a wide
variety of products. As the Leddar™One can be easily integrated,
almost any system can benefit from its advanced detection and
ranging capabilities. This single-element sensing module is par-
ticularly suitable for applications such as level sensing, security
and surveillance and proximity detection, just to name a few.
The focused, yet conic beam offers excellent overall range and
performance. In addition, the module’s compact size, ease of
integration, low power consumption and high accuracy gives
developers and integrators great flexibility to enhance their own
branded products.
Discover Leddar^™ Technology
Leddar™ (Light-Emitting Diode Detection and Ranging) is a
unique detection and ranging technology created by LeddarTech
that performs time-of-flight measurement using pulses from
infrared LEDs. Leddar™ continuously provides rapid and accurate
detection and ranging, covering narrow and wide beams, in
all cases without any moving parts. The diffused light beam,
processed through innovative algorithms, allows for the detection
of a wide range of objects under various environmental conditions.
Interfaces
The Leddar™One offers an efficient six-pin interface, including a
3.3 V UART link, or RS-485. The module uses the MODBUS protocol,
providing a robust, standard register-access interface for easy con-
figuration and acquisition of measurement data. An interrupt signal
is also provided to facilitate low-latency data acquisition.
The power and interface signals are included on a six-pin standard
0.1” pitch header with the following pinout:
1
2
3
GND
IRQ
5V
Legend:
RX/TX = 3.3 V UART
RS-485+ / RS-485- = RS-485
4
5
6
RX or
RS-485+
TX or
RS-485-
RESET_N
The RS-485 option, in combination with MODBUS, makes it
easy to integrate multiple sensors with an RS-485 network.
Additional Interface Options
With the addition of an expansion module, the Leddar™One can
be tailored to the specific needs of any application. For example,
the module is available upon request with PNP/NPN, 4-20 mA and
0-10 V outputs, and RS-485 link for industrial applications such as
level sensing and many others.
Configuration Software and
Software Development Kit
To facilitate development and integration, LeddarTech provides
dedicated configuration software (Leddar™ Configurator) and a
development kit (Leddar™ Enabler SDK) for its module. The Leddar™
Configurator enables users to set up the sensor, as well as view,
record and play back sensor measurement data. The Leddar™
Enabler SDK includes an example program and complete source
code that demonstrates configuration and data acquisition
through the serial link and MODBUS protocol. The code can be
easily ported to any system, resulting in fast integration of the
sensor in the final application.