LED-90W Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers

LED-90W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<30.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
1.2 Amps max
Maximum Power:
90W
Current Accuracy:
± 1% Over input line variation
Load Regulation:
± 3%
THD:
<_ 20% @ full load
Leakage Current:
400 µA Typical
Hold Up Time:
Protection:
Half Cycle
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection reset by power cycling
Electrical Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
Sound Rating:
Class A
MTBF:
418,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
EMC:
FCC 47CFR Part 15 Class B compliant
Ordering Options:
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
See page 3 for additional specifications.
-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output
side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,
200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications.
Sign Components Manual
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
• Total Power: 90 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Power Factor
• UL8750, CSA 22.2, EN61347,
EN61000-3-2, EN61000-3-3 Class C
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA ±3%)
Range (Vdc) Power (W) Efficiency
LED90W-257-C0350-XX
350
85-257
90
92%
LED90W-200-C0450-XX
450
66-200
90
92%
LED90W-128-C0700-XX
700
42-128
90
92%
LED90W-085-C1050-XX
1050
28-85
90
91%
LED90W-064-C1400-XX
1400
21-64
90
91%
LED90W-056-C1600-XX
1600
18-56
90
91%
LED90W-048-C1875-XX
1875
16-48
90
91%
LED90W-036-C2500-XX
2500
12-36
90
90%
LED90W-030-C3000-XX
3000
10-30
90
90%
LED90W-027-C3330-XX
3330
9-27
90
89%
LED90W-025-C3500-XX
3500
8-25
90
89%
LED90W-022-C4090-XX
4090
7-22
90
89%
LED90W-020-C4500-XX
4500
7-20
90
88%
LED90W-018-C5000-XX
5000
6-18
90
87%
LED90W-015-C6000-XX
6000
5-15
90
87%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage - Product Specifications
Model Number
Output Voltage Output Current Max. Output
(Vdc ±5%)
Range (mA) Power (W)
LED90W-015
15
1500-6000
90
LED90W-018
18
1250-5000
90
LED90W-020
20
1125-4500
90
LED90W-022
22
1023-4090
90
LED90W-025
25
875-3500
90
LED90W-027
27
833-3330
90
LED90W-030
30
750-3000
90
LED90W-036
36
625-2500
90
LED90W-048
48
469-1875
90
LED90W-056
56
400-1600
90
LED90W-064
64
350-1400
90
LED90W-085
85
263-1050
90
LED90W-128
128
175-700
90
LED90W-200
200
113-450
90
LED90W-257
257
88-350
90
Typical
Efficiency
87%
87%
88%
89%
89%
89%
90%
90%
91%
91%
91%
91%
92%
92%
92%
Class 2: US/Canada US Only
Rev 8-31-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com