LED-60W Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers

LED-60W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<30.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
0.90 Amps max
Maximum Power:
60W
Current Accuracy:
± 1% Over input line variation
Load Regulation:
± 3%
THD:
<_ 20% @ full load
Leakage Current:
400 µA Typical
Hold Up Time:
Protection:
Half Cycle
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection reset by power cycling
Environmental Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
Sound Rating:
Class A
MTBF:
418,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
EMC:
FCC 47CFR Part 15 Class B compliant
Ordering Options:
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
See page 3 for additional specifications.
-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output
side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,
200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications.
Sign Components Manual
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
• Total Power: 60 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Power Factor
• UL8750, CSA 22.2, EN61347, EN61000-3-2,
EN61000-3-3 Class C
• UL Sign Components Manual (S.A.M. Models)
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA ±3%)
Range (Vdc) Power (W) Efficiency
LED60W-170-C0350-XX
350
56-170
59.5
92%
LED60W-134-C0450-XX
450
44-134
60
92%
LED60W-086-C0700-XX
700
28-86
60
92%
LED60W-058-C1050-XX
1050
19-58
60
91%
LED60W-048-C1250-XX
1250
16-48
60
91%
LED60W-043-C1400-XX
1400
14-43
60
91%
LED60W-036-C1670-XX
1670
12-36
60
91%
LED60W-027-C2300-XX
2300
9-27
60
90%
LED60W-024-C2500-XX
2500
8-24
60
90%
LED60W-022-C2720-XX
2720
7-22
59.8
89%
LED60W-020-C3000-XX
3000
7-20
60
89%
LED60W-018-C3330-XX
3330
6-18
59.9
88%
LED60W-015-C4000-XX
4000
5-15
60
87%
LED60W-012-C5000-XX
5000
4-12
60
87%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage - Product Specifications
Model Number
• ^LED60W-012
LED60W-015
Output Voltage Output Current Max. Output
(Vdc ±5%)
Range (mA) Power (W)
12
1250-5000
60
15
1000-4000
60
Typical
Efficiency
87%
87%
LED60W-018
18
833-3300
59.9
88%
LED60W-020
20
750-3000
60
89%
LED60W-022
• ^LED60W-024
LED60W-027
22
680-2720
59.8
89%
24
625-2500
60
90%
27
575-2300
60
90%
LED60W-036
36
418-1670
60
91%
LED60W-043
43
350-1400
60
91%
LED60W-048
48
313-1250
60
91%
LED60W-058
58
263-1050
60
91%
LED60W-086
86
175-700
60
92%
LED60W-134
134
113-450
60
92%
LED60W-170
170
88-350
59.5
92%
• Indicates S.A.M.
Class 2:
US/Canada US Only
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com