LED-50W_17 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers

LED-50W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<20.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
0.50 Amps max
Maximum Power:
50W
Current Accuracy:
± 1% Over input line variation
Load Regulation:
± 3%
THD:
<_ 20% @ Full Load
Leakage Current:
400 µA Typical
Hold Up Time:
Protection:
Half Cycle
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection with Auto Recovery
• Total Power: 50 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Power Factor
• UL8750
• UL Sign Components Manual (S.A.M. Models)
Environmental Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp.
90°C (3330mA and 15V, 88°C)
(4200mA and 12V, 78°C)
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
Sound Rating:
Class A
MTBF:
474,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
EMC:
FCC 47CFR Part 15 Class B compliant
Ordering Options:
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
See page 3 for additional specifications.
Sign Components Manual
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA ±3%)
Range (Vdc) Power (W) Efficiency
LED50W-142-C0350-XX
350
47-142
49.7
89%
LED50W-111-C0450-XX
450
37-111
49.9
89%
LED50W-072-C0530-XX
530
24-72
38.1
88%
LED50W-072-C0700-XX
700
24-72
50
88%
LED50W-060-C0830-XX
830
20-60
49.8
88%
LED50W-048-C1050-XX
1050
16-48
50
88%
LED50W-042-C1190-XX
1190
14-42
50
87%
LED50W-040-C1250-XX
1250
13-40
50
87%
LED50W-036-C1400-XX
1400
12-36
50
87%
LED50W-029-C1750-XX
1750
9-29
50
87%
LED50W-024-C2100-XX
2100
8-24
50
87%
LED50W-020-C2500-XX
2500
7-20
50
87%
LED50W-018-C2800-XX
2800
6-18
50
86%
LED50W-015-C3330-XX
3330
5-15
49.9
85%
LED50W-012-C4200-XX
4200
4-12
50
84%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage - Product Specifications
Model Number
• ^LED50W-012
LED50W-015
Output Voltage Output Current Max. Output
(Vdc ±5%)
Range (mA) Power (W)
12
1050-4200
50
15
833-3330
49.9
Typical
Efficiency
84%
85%
LED50W-018
18
700-2800
50
86%
LED50W-020
• ^LED50W-024
LED50W-029
20
625-2500
50
87%
24
525-2100
50
87%
29
438-1750
50
87%
LED50W-036
36
350-1400
50
87%
LED50W-040
40
313-1250
50
87%
LED50W-042
42
298-1190
50
87%
LED50W-048
48
263-1050
50
88%
LED50W-060
60
208-830
49.8
88%
LED50W-072
72
175-700
50
88%
LED50W-111
111
113-450
49.9
89%
LED50W-142
142
88-350
49.7
89%
• Indicates S.A.M.
Class 2: US/Canada
Rev 10-13-16
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com