LED-39W-PR Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Dimmable Constant Current Driver

LED-39WPR Series– Programmable LED Driver
Dimmable Constant Current Driver
Set maximum current by Rset resistor, no computer needed
Metal Housing
Electrical Specifications
Input Voltage Range:
120-277 Vac Nom. (108-305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
40.0 Amps max @ 230 Vac
Input Current:
0.40 Amps max
Maximum Power:
39.2W
No-load Output Voltage: 60V
Load Regulation:
THD:
<_ 20% @ full load
Peak Current:
20% during start-up
Ripple Current:
5%
Start-up Time:
500mS typical
Output Protection:
Over-Voltage, Short Circuit Protection with Auto Restart
Environmental Specifications
Maximum Case Temp. 81°C
Minimum Starting Temp: -40ºC
Storage Temperature:
-40ºC to +85ºC
Humidity:
10% to 90%
Cooling:
Convection
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
Sound Rating:
Class A
Lifetime:
100,000 Hours @ 60ºC Tc, 50,000 Hours @ 70ºC Tc
EMC:
FCC 47CFR Part 15 Class A compliant
-BD indicates bottom leads and 0-10V Dimming. See page 4.
• Total Power: 39 Watts
• Input Voltage: 120-277 Vac
• Adjustable Output Current:
190-700mA
• UL Dry & Damp Location Rated
• High Power Factor
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max Output Typical
Range (Select Level) Range (Vdc) Power (W) Efficiency
LED39WPR-056-C0700-BD
190-700
20-56
39.2
85%
Class 2: US/Canada
E332160
Bottom View
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 5-18-15
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com