English
Language : 

LED-25W-LETE Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Constant Current LED Drivers CCR Mode: ELV & Inc 100-10% Dimmable Black Magic Thermal Advantage™ Plastic Housing
LED-25W Series– Line Voltage Dimmable
Constant Current LED Drivers
CCR Mode: ELV & Inc 100-10% Dimmable
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
120-230 Vac Nom. with dimmer,
100-277 Vac Nom. without dimmer
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V without dimmer
Inrush Current:
<10 Amps max @ 120Vac, cold start 25ºC
Input Current:
0.25 A max 120Vac 60Hz, max load
Maximum Power:
25W
Current Regulation:
± 5% Over input line variation
Load Regulation:
± 8%
THD:
<20% @ full load, 120V
Typical Efficiency
84% at 120Vac
Output Protection:
Over-Voltage, Over-Current and Short Circuit Protection
with Auto Recovery
Environmental Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Sound Rating:
Class A
Vibration Frequency:
5-55 Hz/2g, 30 minutes
Impact Resistance:
1g/s
MTBF:
402,000 Hours @ full load per MIL-217F Notice 2
EMC:
FCC 47CFR Part 15 Class B compliant
Weight:
7.0 oz. (198 g)
Sign Components Manual
• Total Power: 25 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA4
• High Power Factor
ELV Dimming Product Specifications
Model Number
Output Voltage Output Current Max. Output Typical
Range (Vdc)
(mA ±4%)
Power (W) Efficiency
LED25W-72-C0350-TE
36-72
350
25
86%
LED25W-48-C0520-TE
24-48
520
25
85%
LED25W-36-C0700-TE
18-36
700
25
84%
LED25W-24-C1040-TE
12-24
1040
25
83%
For use with electronic low voltage dimmers
INC Dimming Product Specifications
Model Number
Output Voltage Output Current Max. Output Typical
Range (Vdc)
(mA ±4%)
Power (W) Efficiency
LED25W-72-C0350-LE
36-72
350
25
86%
LED25W-48-C0520-LE
24-48
520
25
85%
LED25W-36-C0700-LE
18-36
700
25
84%
LED25W-24-C1040-LE
12-24
1040
25
83%
For use with standard incandescent dimmers
Class 2: US/Canada
US Only
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-25-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com