LED-20W Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers with Isolation, Constant Current, Dimming & Constant Voltage

LED-20W Series
Switch Mode LED Drivers with Isolation,
Constant Current, Dimming & Constant Voltage
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<15.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
0.25 Amps max at 120 Vac
Efficiency:
85% typical at max load
Maximum Power:
20W
Line Regulation:
± 2%
Load Regulation:
± 3%
THD:
<_ 20% @ >_ 70% load 100-230V, >_ 80% load 277V
Leakage Current:
300 µA Typical
Hold Up Time:
Output Protection:
Half Cycle
Over-Voltage, Over-Current, and
Short Circuit Protection with Auto Recovery
Environmental Specifications
Minimum Starting Temp: -30ºC
Storage Temperature:
-40ºC to +85ºC
Maximum Case Temp. 90°C
Humidity:
5% to 95%
Cooling:
Convection
Sound Rating:
Class A
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
MTBF:
488,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
Weight:
5.8 oz (165 grams) typical
Ordering Options:
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
See page 3 for additional specifications.
-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output
side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,
200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications.
Sign Components Manual
E332160
• Total Power: 20 Watts
• IP66 & NEMA4
• Input Voltage: 100-277 Vac Nom. • High Power Factor
• UL Dry & Damp Location Rated • UL Sign Components Manual
(S.A.M. Models) Models
Constant Current - Product Specifications
Model Number
LED20W-57-C0350-XX
LED20W-48-C0350-XX
LED20W-43-C0460-XX
LED20W-40-C0500-XX
LED20W-36-C0550-XX
LED20W-28-C0700-XX
LED20W-24-C0700-XX
LED20W-24-C0830-XX
LED20W-22-C0910-XX
LED20W-18-C1100-XX
LED20W-15-C1330-XX
LED20W-13-C1540-XX
LED20W-12-C1660-XX
Output Current Output Voltage Max. Output Typical
(mA ±4%)
Range (Vdc) Power (W) Efficiency
350
19-57
20
84%
350
16-48
16.8
83%
460
15-43
20
83%
500
14-40
20
82%
550
12-36
20
82%
700
10-28
20
81%
700
8-24
16.8
81%
830
8-24
20
81%
910
7-22
20
81%
1100
6-18
20
80%
1330
5-15
20
80%
1540
4-13
20
79%
1660
4-12
20
78%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage - Product Specifications
Model Number
• ^LED20W-12
LED20W-13
Output Voltage Output Current Max. Output
(Vdc ±5%)
Range (mA) Power (W)
12
415-1660
20
13
385-1540
20
Typical
Efficiency
82%
82%
LED20W-15
15
333-1330
20
83%
LED20W-18
18
275-1100
20
83%
LED20W-22
• ^LED20W-24
LED20W-28
22
228-910
20
84%
24
208-830
20
84%
28
175-700
20
84%
LED20W-36
36
138-550
20
85%
LED20W-40
40
125-500
20
85%
LED20W-43
43
115-460
20
85%
LED20W-48
48
88-350
16.8
85%
LED20W-57
57
88-350
20
85%
• Indicates S.A.M.
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Class 2: US/Canada US Only
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com