LED-17W Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing

LED-17W Series
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<2 Amps max @ 230 Vac, cold start 25ºC
Input Current:
0.20 Amps max at 115 Vac
Efficiency:
82% typical at max load
Maximum Power:
17W
Current Accuracy:
± 1% (when applicable)
Load Regulation:
± 3%
THD:
<_ 20% @ 120 Vac, <_ 35% @ 277 Vac
Leakage Current:
300 µA Typical
Hold Up Time:
Protection:
Half Cycle
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection with Auto Recovery
Environmental Specifications
Minimum Starting Temp: -30ºC
Storage Temperature:
-40ºC to +85ºC
Maximum Case Temp. 80°C
Humidity:
5% to 95%
Cooling:
Convection
Sound Rating:
Class A
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
MTBF:
EMC:
543,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
Compliant to CISPR 22 Class B, CISPR 14-1 Class B,
GB4343 1-2003, GB17625.1-2003
• Total Power: 17 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• Suitable for use signs (UL48)
• High Power Factor
• UL Sign Components Manual (S.A.M. Models)
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output
(mA ±3%)
Range (Vdc) Power (W)
LED17W-36-C0470
470
18-36
17
LED17W-24-C0700
700
12-24
17
LED17W-12-C1400
1400
6-12
17
Typical
Efficiency
83%
82%
82%
Constant Voltage - Product Specifications
Model Number
• ^LED17W-12
• ^LED17W-24
LED17W-36
Output Voltage Output Current Max. Output Typical
(Vdc ±3%)
Range (mA) Power (W) Efficiency
12
350-1400
17
82%
24
175-700
17
82%
36
118-470
17
83%
• Indicates S.A.M.
Sign Components Manual
E332160
Class 2: US/Canada
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Safety and EMC Compliance
UL/CUL
UL8750, UL1310
CSA
22.2
CE
EN61347
FCC, 47CFR Part 15 Class B
Rev 9-8-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com