LED-100W Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers

LED-100W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<30.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
1.30 Amps max
Maximum Power:
100W
Current Accuracy:
± 1% Over input line variation
Load Regulation:
± 3%
THD:
<_ 20% @ full load
Leakage Current:
400 µA Typical
Hold Up Time:
Protection:
Half Cycle
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection reset by power cycling
Electrical Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
Sound Rating:
Class A
MTBF:
418,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
EMC:
FCC 47CFR Part 15 Class B compliant
• Total Power: 100 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Power Factor
• UL8750, CSA 22.2, EN61347,
EN61000-3-2, EN61000-3-3 Class C
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA ±3%)
Range (Vdc) Power (W) Efficiency
LED100W-286-C0350-XX
350
95-286
100
92%
LED100W-222-C0450-XX
450
74-222
100
92%
LED100W-143-C0700-XX
700
47-143
100
91%
LED100W-095-C1050-XX
1050
31-95
100
91%
LED100W-071-C1400-XX
1400
23-71
100
91%
LED100W-057-C1750-XX
1750
19-57
100
90%
LED100W-048-C2100-XX
2100
16-48
100
90%
LED100W-041-C2450-XX
2450
13-41
100
90%
LED100W-036-C2800-XX
2800
12-36
100
90%
LED100W-032-C3150-XX
3150
10-32
100
90%
LED100W-028-C3570-XX
3570
9-28
100
89%
LED100W-024-C4200-XX
4200
8-24
100
89%
LED100W-020-C5000-XX
5000
7-20
100
88%
LED100W-018-C5550-XX
5550
6-18
100
88%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Ordering Options:
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
See page 3 for additional specifications.
-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output
side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,
200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications.
Sign Components Manual
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Constant Voltage - Product Specifications
Model Number
Output Voltage Output Current Max. Output
(Vdc ±5%)
Range (mA) Power (W)
LED100W-018
18
1388-5550
100
LED100W-020
20
1250-5000
100
LED100W-024
24
1050-4200
100
LED100W-028
28
893-3570
100
LED100W-032
32
788-3150
100
LED100W-036
36
700-2800
100
LED100W-041
41
613-2450
100
LED100W-048
48
525-2100
100
LED100W-057
57
438-1750
100
LED100W-071
71
350-1400
100
LED100W-095
95
263-1050
100
LED100W-143
143
175-700
100
LED100W-222
222
113-450
100
LED100W-286
286
88-350
100
Typical
Efficiency
88%
88%
89%
89%
90%
90%
90%
90%
90%
91%
91%
91%
92%
92%
Rev 8-31-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com