LE365S-41 Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – W48xH48mm, Weekly/Yearly timer

LE365S-41
Weekly/Yearly Timer
W48×H48mm, Weekly/Yearly timer
Features
● Easy to check and change the program setting
● Customizable weekly or yearly unit time setting and
control by user
● Includes daylight saving time function
● 1 independent control output.(Relay)
● Flush and surface, DIN rail mounting are in one unit.
Please read “Caution for your safety” in operation
manual before using.
Ordering information
LE365 S
41
Output
Power supply
Size
Item
1
4
S
LE365
1 Relay outputs
100-240VAC
DIN W48×H48mm
Weekly/Yearly timer
Specifications
Model
LE365S-41
Power supply
100-240VAC 50/60㎐
Allowable voltage range
90 to 110% of rated voltage
Power consumption
2.4VA
Timing program
48 steps for weekly, 24 steps for yearly
Operation mode
ON/OFF mode, cycle mode, pulse mode
Mounting
Panel flush, surface, DIN rail
Time deviation
±15sec/month(25℃) (±4sec/week)
Temperature error
±0.01% ±0.05sec.
Memory protection
Over 5 years(at 25℃)
Control
Output
Contact type
Contact capacity
Output number
SPST(Single Pole Single Throw)
250VAC 15A resistive load
Independent 1 output(1a)
Relay ^Mechanical
life cycle _Electrical
Min. 5,000,000 operations(Switching capacity 30 times/minute)
50,000 operations<Switching capacity 20 times/1 minute, at 250VAC 15A(resistive load)>
Insulation resistance
Min. 100MΩ(at 500VDC megger)
Dielectric strength
2000VAC 50/60Hz for 1minute
Noise strength
±2kV the square wave noise(pulse width : 1㎲) by the noise simulator
Environ ^{Ambient temperature -10 to 55℃, storage: -25 to 65℃}
-ment _{Ambient humidity 35 to 85%RH, storage: 35 to 85%RH}
Unit weight
Approx. 110g
※Environment resistance is rated at no freezing or condensation.
Connections
1234
CONTACT OUT:
250VAC 15A
RESISTIVE LOAD
SOURCE:
100-240VAC
50/60㎐
(A)
Photo
electric
sensor
(B)
Fiber
optic
sensor
(C)
Door/Area
sensor
(D)
Proximity
sensor
(E)
Pressure
sensor
(F)
Rotary
encoder
(G)
Connector/
Socket
(H)
Temp.
controller
(I)
SSR/
Power
controller
(J)
Counter
(K)
Timer
(L)
Panel
meter
(M)
Tacho/
Speed/ Pulse
meter
(N)
Display
unit
(O)
Sensor
controller
(P)
Switching
mode power
supply
(Q)
Stepper
motor&
Driver&Controller
(R)
Graphic/
Logic
panel
(S)
Field
network
device
(T)
Software
(U)
Other
K-87