LC210A Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – General Purpose DMM Kit

TL-130A
CP-3
Model TL-130A
General Purpose DMM Kit
Model CP-3
If you need only one basic accessory kit for your
meter, this is the one. Attach probes or clips to
the sheath plug to complete your test. Soft, flexible
silicone leads make movement easy. Kit is voltage
and current rated for either electronic or electrical
applications.
DC/AC Current Clamp
■ Converts any DMM to a current clamp
■ Measures current without disconnecting
circuit under test
■ Measures to 400A DC or AC
■ All components compliant
to IEC61010-2-031
■ Outputs 1 mV per Amp, operates on
2V range of any DMM
TL-50
■ Silicone Lead Wire length 60" (1.5m)
■ Tri-fold Velcro Pouch
Features
model
TL-130A
4mm Straight to Right-Angle
Silicone Leads, 1.5m
1000V CATIII 12A
Probe Bodies w/Ø2mm Tip 1000V CATIII 36A
Alligator Style Clips
1000V CATIII 20A
Alligator Clips
300V CATI 3A
Specifications
model
CP-3
(Accuracy specified at 18˚ to 28˚C)
Current Range
2A to 400A, DC or AC
Frequency Response (AC) 50 Hz - 400 Hz
Accuracy
Input Resistance
±(2% reading + 2A)
10kΩ min.
Maximum Conductor Size 1.1" (30mm)
Power Requirement
9V battery, NEDA 1604
Battery Life
100 hr typical
Operating Temperature 0˚ to 40˚C, <70% RH
Storage Temperature
-20˚ to + 70˚C, <80% RH
Model TL-50
Maxi-Pro DMM Kit
Complete accessory kit for all your DMM testing needs.
Includes soft, flexible silicone lead wire easy movement and
Tri-Fold Velcro Pouch for convenient storage.
■ All components compliant to IEC61010-2-031
■ Silicone lead wire length 60" (1.5m)
■ Tri-fold Velcro Pouch
TL-10
Model TL-10
PR-650A
Features
4mm Straight to Right-Angle
Silicone Leads, 1.5m
Probe Bodies w/Ø2mm Tip
Pincer Style Clips
Fully Insulated Alligator Clips
Alligator Clips
Spade Lug Adapters
Banana Plug Adapters
TL-50
1000V
1000V
1000V
1000V
300V
42V (1000V)
42V (1000V)
model
CATIII 12A
CATIII 36A
CATIII 6A
CATIII 20A
CATI
3A
36A
36A
SMD Probe Kit
Model PR-650A
Extended, slim-line probe body for easy reach.
RF DMM Probe
Use with small SMD components or general
purpose test points. Includes soft, flexible silicone
lead wires for easy movement and clear, PVC
Pouch for convenient storage.
■ All components compliant
to IEC61010-2-031
■ Silicone Lead Wire length 60" (1.5m)
■ Clear PVC Pouch
Features
4mm Straight to Right-Angle
Silicone Leads, 1.5m
Extended Tip Probe Bodies
model
TL-10
1000V CATIII 12A
1000V CATIII 20A
All purpose RF demodulator probe, usable
with most DMMs. Allows a DMM to
measure sine wave AC signals:
1Veff=1VDC Features light weight design.
Specifications
model
PR-650A
Bandwidth
100kHz to 650MHz
Accuracy
±1dB (100kHz-300MHz)
±3dB (300MHz-650MHz)
Input Voltage 100V
HF Voltage
35Veff
Actuating Voltage 350mV
DMM Input
Impedance
10MΩ
Input Capacitance 8pF
Cable Length 48" (1.2m)
PR-28A
Model PR-28A
40 kV High Voltage DMM Probe
If the voltages you need to measure are above the
specifications of general purpose probes, B+K Precision
has a higher voltage probe for you.
Features
Attenuation
Voltage (AC)
Voltage (DC)
Bandwidth
x1000
20kV
40kV
60Hz
model
PR-28A
Impedance
1000MΩ
Accuracy (AC & DC) ±3%
Cable Length
48" (1.2m)
For your nearest distributor, call 800-462-9832 or www.bkprecision.com
89