KXTC9-4100 Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – 2g Tri-axis Analog Accelerometer Specifications

± 2g Tri-axis Analog
Accelerometer Specifications
PART NUMBER:
KXTC9-4100
Rev. 1
Jan-2011
Product Description
The KXTC9-4100 is a Tri-axis, silicon micromachined
accelerometer with a full-scale output range of +/-2g (19.6 m/s/s).
The sense element is fabricated using Kionix’s proprietary plasma
micromachining process technology. Acceleration sensing is based
on the principle of a differential capacitance arising from
acceleration-induced motion of the sense element, which further
utilizes common mode cancellation to decrease errors from
process variation, temperature, and environmental stress. The
sense element is hermetically sealed at the wafer level by bonding
a second silicon lid wafer to the device using a glass frit. A
separate ASIC device packaged with the sense element provides
signal conditioning and self-test. The accelerometer is delivered in
a 3 x 3 x 0.9mm Land Grid Array (LGA) plastic package operating
from a 1.8 – 3.6V DC supply. The KXTC9 features a factory
programmable low pass filter.
There are 2 factory programmable modes of operation for the KXTC9:
Mode 00 – The Enable pin must be high for normal operation and low for power shutdown.
Mode 01 – The Enable pin must be low for normal operation and high for power shutdown.
The KXTC9-4100 is factory programmed to be in MODE 00.
36 Thornwood Dr. – Ithaca, NY 14850
tel: [phone] – fax:[phone]
www.kionix.com - [e-mail]
© 2010 Kionix – All Rights Reserved
367-1783-1009020951
Page 1 of 10