KIT-14035 Datasheet, PDF (1/2 Pages) –

pi-topCEED
INSTRUCTION
MANUAL
Follow this side if your pi-topCEED has
GPIO Breakout Cable.
This cable makes your pi-topCEED
compaitble with pi-top Add-ons.
Getting Ready: What’s in the Box?
pi-topCEED
MICRO COMPUTER
Power Supply
*Warning: Small parts can be choking hazards and should
be kept away from children under 3 yr old.
Step 2: Inserting Mag Clips
GPIO CARD
*MICRO SD CARD
*MAG CLIPS
X4
OPTIONAL ADD-ONS
pi-topPROTO
pi-topSPEAKER
Push Mag Clips into your Micro Computer.
Welcome
Welcome to the pi-top family!
pi-topCEED is very special to us (and so are you, of course!).
We are hugely passionate about this product and are thrilled to
provide excellent content so you can learn to make anything.
Your support has helped to make this a reality and we thank you
for joining us on this exciting maker journey!
We believe pi-topCEED is the best way to get started with
hardware and software. Open up your box and immediately
immerse yourself in a new way of exploring computing -
unlocking a world of possibilities. As you grow and learn,
pi-topCEED will be part of your journey to expand your
knowledge - the only limit is your imagination!
So, let’s get started! Set up your pi-topCEED following our
manual so you can log-in and start your own cool projects, play
our educational game CEEDuniverse and more!
Step through the world’s gateway to technology.
With love,
The pi-top Team
Step 1: Inserting MicroSD Card
YOU WILL NEED
X4
Step 3: Preparing pi-topCEED
Step 4: Connecting HDMI Cable
Connect the HDMI Cable into your
Micro Computer.
Remove the Acylic Slice from
your pi-topCEED.
Step 5: Inserting Micro Computer
Place your Micro Computer onto the
Mag Rail and slide it to the end.
Ensure the two Mag Clips on the right
are lifted over the bumps at the end of
the Mag Rail.
Step 6: Connecting GPIO
Step 7: Sliding in Acrylic Slice
Step 8: Adjusting Kick Stand
Adjust the Kick Stand so your
pi-topCEED sits on a desk at a
comfortable viewing angle.
Step 10: Place pi-top Add-ons on the Mag Rails
Step 9: Connecting Power Supply
Plug in the Power Supply and hold
the Power Button beside it for 2-3
seconds to turn on your pi-topCEED.
You can now begin your journey into
the world of computing!
Place your pi-top Add-on on the
Mag Rails and slide it towards the
Hub PCB.