IZPR3P422 Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – Rear mounted sealed pushbutton switches - bushing Ø 16 - metal - latching

Preliminary
IZ series
Rear mounted sealed pushbutton switches - bushing Ø 16 - metal - latching
Distinctive features and specifications
K Rear mounting for easier installation
K Latching action metal models
K Fixed or variable panel thickness
K Illuminated or non-illuminated
K Flat actuator for optional marking
K Sealed to IP67
ENVIRONMENTAL AND GENERAL SPECIFICATIONS
• Degree of protection : IP67
• Temperature range : -40°C to +85°C
• Total travel : 2,5 mm (.098)
• Mechanical life : 200.000 cycles
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
100mA 24VDC - 200.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms between terminals
1.000 Vrms between terminals and frame
LED COMPONENT SPECIFICATIONS
LED colour
Super red (L0S)
Yellow (L0Y)
Green (L0G)
Blue (L0B)
Forward current
20mA
20mA
20mA
20mA
Typ. forward voltage Max. forward voltage
1,95V
1,95V
2V
2,05V
3,2V
3,70V
3,2V
4V
A resistor must be series-connected by the user.
Resistor value = ^{supply voltage - LED forward voltage}
LED forward current
On flying lead versions, the LED resistor can be integrated by APEM on request.
MATERIALS
• Case : thermpoplastic UL94-V0
• Plunger : polyamide
• Bushing/bezel : brass, nickel
plated
• Contacts : silver, gold plated
• Multi-wire lead AWG20,
section 0,6 mm²
• LED wire : AWG26,
section 0,12 mm²
• Lens : polycarbonate
• Terminal seal : epoxy
Dimensions : First dimensions are im mm while inches are shown as bracketed numbers.
Tolerance : The general tolerance for dimensions in this brochure is ± 0,3 (.012).
Overall dimension tolerance is ± 0,5 (.020).
Dimensions, specifications and data shown in this catalogue are subject to change without notice.
APEM
www.apem.com
3