IW2128-485 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Serial-to-WiFi Device Server

Product Brief
Publication Number 17-2590-11
Secure iWiFi^™
Serial-to-WiFi Device Server
General Description:
Secure iWiFi^™ is a serial-to-WiFi device
server that enables installed devices to connect
via their existing serial port to the Internet
over an 802.11b/g Wireless LAN.
Secure iWiFi acts as a security gap
between the host application and the network.
It provides one secure SSL3/TLS1 socket;
supports up to 10 simultaneous active
TCP/UDP sockets and two listening sockets; a
Web server with two websites; SMTP and
POP3 clients; MIME attachments; FTP and
Telnet clients, and SerialNET^™ mode for
serial-to-IP bridging.
Secure iWiFi eliminates the need for any
hardware modifications to the host device.
Simply connect a serial cable from Secure
iWiFi’s RS232 or RS485 connector to your
device. Secure iWiFi is ready to connect to the
WLAN via its integrated antenna.
The Internet engine inside Secure iWiFi is
Connect One’s remotely updateable iChip^™
CO2128 Secure Internet Controller^™.
Connect One’s AT+i^™ protocol eliminates
the need for Internet programming and
minimizes changes to the host application.
Connect One’s SerialNET^™ operating mode
completely eliminates the need for changes to
the host application, as it is a true plug-and-
play operating mode.
Secure iWiFi is powered by an external
9VDC power supply. Alternatively, it can be
powered through pin 9 of the RS232/RS485
connector to the host device. It includes a
Power Save mode for reduced power
consumption.
Application Program Interface:
 Connect One’s AT+i protocol
 SerialNET mode for transparent serial
data-to-Internet bridging
Internet Protocols:
IP, UDP, TCP, ICMP, DNS, DHCP, NTP,
SMTP, POP3, MIME, HTTP, FTP and
TELNET
Security Protocols:
SSL3/TLS1, AES-128/256, SHA-1, HTTPS,
FTPS, RSA, 3DES, RC-4, MD-5, WEP, WPA
and WPA2
Hardware Description:
 Size: 94x63x28mm (3.7x2.5x1.1”)
 Weight: 105g (3.7 oz.)
 Operating Humidity: 90% maximum
(non-condensing)
 Operating Temperature Range: 5° to 50°C
(41° to 122°F)
 Power Supply Input: 6-24VDC. 9V power
supply included unless otherwise specified.
Power from host device optionally
available through pin 9 of serial connector.
 Power Consumption:
1.2W @ 9VDC (typical)
180mW @ 9VDC (Power Save mode)
 LEDs:
LNK – Link status
SNET – SerialNET mode activity
PWR – Power
 Connectors: RS232/RS485, 2.1mm power
jack
 Includes WLAN 802.11b/g antenna
 Plastic enclosure
Performance Specifications:
 Host Data Rate: Up to 1Mbps
 Serial Data Format (AT+i mode):
Asynchronous character; binary; 8 data
bits; no parity; 1 stop bit.
 Serial Data Format (SerialNET mode):
Asynchronous character; binary; 7 or 8
data bits; odd, even, or no parity; 1 stop bit.
 Flow Control: hardware (DTR, RTS, CTS,
DSR) and software flow control
Warranty: One-year limited warranty
Approvals: CE; FCC pending