|
ISR3SAD300 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Sealed pushbutton switches - bushing 12 mm - momentary | |||
|
IB and IS series
Sealed pushbutton switches - bushing à 12 mm - momentary
Distinctive features and specifications
â Snap-in and threaded bushing models
â Compact, light in weight
⢠Behind-panel depth of 13 mm (.512) only
⢠50 % reduction in weight compared to metallic models
â Tactile feedback
â Sealed to IP67 (IS series) or IP54 (IB series)
B1
ENVIRONMENTAL SPECIFICATIONS
⢠Front panel sealing according to IEC 60529 : IP67 (IS) or IP54 (IB)
⢠Shock resistance : 100 g according to IEC 512-4, test 6c
⢠Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d
⢠Salt spray : IEC 512-6, test 11f
⢠Operating temperature : -40°C to +85°C
MATERIALS
⢠Case : thermoplastic UL94-V0
⢠Actuator : polyamide 6/6
⢠Bushing/bezel : polyamide 6/6
⢠Contacts : silver, gold plated
⢠Terminal seal : epoxy
ELECTRICAL SPECIFICATIONS
⢠Max. current/voltage rating with resistive load :
400mA 32VAC - 100mA 48VDC
⢠Initial contact resistance : 50 mΩ max.
⢠Insulation resistance : 1 GΩ min. at 500VDC
⢠Dielectric strength : 1.000 Vrms
⢠Electrical life at full load : 500.000 cycles
GENERAL SPECIFICATIONS
⢠Panel thickness :
- IB series : 0,8 mm (.031) min. - 1,8 mm ( .071) max.
- IS series : 1,5 mm (.059) min. - 4 mm (.157) max.
⢠Total travel : 1,7 mm (.066) +/- 0,3 mm
⢠Typical operating force : 4N +/- 3N
⢠Low level or mechanical life : 1.000.000 cycles
⢠Torque : 1,5 Nm max. applied to nut
⢠Soldering : 300°C max. for 3 seconds
AGENCY APPROVAL
2A 125VAC/250VAC
File E83438
Availability : consult factory for
details of approved models.
Marking : to order switches marked
UL, complete approrpiate box of
ordering format.
Exasmeepleenodf ocuf sthtoemsesrwieistc.h:
Panel mounting : see next pages.
APEM
www.apem.com
B1-25
|
▷ |