IQS621 Datasheet, PDF (1/66 Pages) List of Unclassifed Manufacturers – Unique combination of sensing:Capacitive sensing

IQ Switch^
ProxFusion^ Series
IQS621 Datasheet
Combination sensor with ambient light sensing (ALS), capacitive proximity/touch, Hall-
effect sensor & inductive sensing capabilities
The IQS621 ProxFusion^ IC is a multifunctional, ambient light sensing (ALS), capacitive, Hall-effect
& inductive sensor designed for applications where any or all of the technologies may be required.
The IQS621 is an ultra-low power solution designed for short or long term activations through any of
the sensing channels. The IQS621 is fully I²C compatible.
Features
 Unique combination of sensing
technologies:
o Capacitive sensing
o Ambient light sensing (ALS)
o Hall-effect sensing
o Inductive sensing
 Capacitive sensing
o 2pF to 200pF external capacitive load
capability
o Fully adjustable sensing options
 Ambient light sensing (ALS)
o Absolute lux output
o Human eye response compensated
o 4-bit ALS range output (0 - 10)
o Dual threshold detection for day/night
indication with hysteresis
 Hall-effect sensing
o No external components required
o Dual direction Hall switch sensor
o 2 level detection (widely variable)
o Detection range 1mT – 100mT
 Inductive sensing
o Metal sensing UI with 2 level variable
detection and hysteresis
o Only external sense coil required (PCB
trace)
 Multiple integrated
UI options based on
years of experience in
sensing on fixed and
mobile platforms:
o Proximity / Touch
o Proximity wake-up
UOLG 2.8 x 2.5 x 0.6
9-pin
 Automatic Tuning
Representations only
Implementation (ATI) – performance
enhancement (10bit)
 Minimal external components
 Standard I²C interface (polling with sub 1ms
clock stretching)
 Optional RDY indication for event mode
operation
 Low power consumption: 300uA (50 Hz
response, all technologies in use), 2.5uA
(low power mode, zoom to scanning mode
with wake-up)
 Event or Streaming mode
 Supply voltage: 1.8V to 3.3V
 Low profile UOLG - 2.8 x 2.5 x 0.6 - 9-pin
package
Applications
 Mobile electronics (phones/tablets)
 Home automation & lighting control
 White goods and appliances
 Wearable devices
 Human Interface Devices
 Aftermarket automotive¹
Available Packages
TA
UOLG-2.8 x 2.5 x 0.6 – 9N
-40°C to 85°C
IQS621
1 _{The part is not automotive qualified.}
Copyright © Azoteq 2016
All Rights Reserved
IQS621 Preliminary pre-production datasheet revision 0.91
Information in this datasheet is based on products in the design, validation or qualification phase of
development. The performance and parameters shown in this document are preliminary without any
warranty and are subject to change without notice.
Page 1 of 66
November 2016