IQS316EV01 Datasheet, PDF (1/9 Pages) List of Unclassifed Manufacturers – IQ Switch - ProxSense Series

IQ Switch^®
ProxSense^® Series
IQS316EV01 Evaluation Kit User Manual
IQ Switch^® - ProxSense^® Series
1 Introduction
This user guide describes the operation of
the IQS316EV01 Evaluation Kit. The EV-
Kit consists of three IQS316 controller
boards. A controller board is interfaced to
any personal computer with the Azoteq
Configuration Tool (CT120/200), and the
IQS316 Graphical User Interface (GUI).
The purpose of the IQS316 EV-Kit is to
help application and development
engineers in evaluating the IQS316
proximity and touch sensor.
2 IQS316 Controller Board
Figure 2.1 Top view of IQS316 EV-Kit controller board
3 Using the Software GUI
Download and install the IQS316 Software GUI available at:
http://www.azoteq.com/products/download.php?downloadid=241
Plug in the ribbon cable provided into
the CT120/200 Configuration Tool, and
into the controller board
Plug the desired sense antennae into
the controller board
After opening the GUI, “IQS316
Demo”, select the communication type
“SPI” or “I²C” as indicated in Figure
3.1, depending on the mode that the
IQS316 Controller module is
configured in (default SPI).
See Figure 3.1
Copyright © Azoteq (Pty) Ltd 2010.
All Rights Reserved.
IQS316EV01 Evaluation Kit User Manual
Revision 1.1
Page 1 of 8
January 2012