|
IQS231 Datasheet, PDF (1/37 Pages) List of Unclassifed Manufacturers – Single Channel Capacitive Proximity/Touch Controller for SAR applications | |||
|
ProxSense® Series
IQS231 Datasheet
Single Channel Capacitive Proximity/Touch Controller for SAR applications
Features
ï· Pin compatible with
IQS127/128/227/228/211
ï· Replacement solution for the IQS128 to
meet SAR regulations (failsafe & long-term
activation testing) and improve performance
ï· Improved IQS128 DYCALTM operation with
quick release detection for improved SAR
safety
ï· Human detection options for start-up
detection and improved user experience
(non-default, FCC approval pending)
ï· 1.75V to 3.6V Input voltage, trimmed to use
proximity detection with 1.8V digital
interface
ï· External threshold adjustment pin
(minimize need for pre-empted OTP
adjustments)
ï· Minimal external components (direct input
strap)
ï· Standalone failsafe mode (backwards
compatible failsafe output, short pulses on
output to indicate operational device)
ï· Default OTP options focus on safety and
passing SAR lab qualification, OTP
changes offer performance advantages
ï· Quick release detection â effectively
prevent false triggers
ï· Quick release sensitivity options
Applications
ï· SAR Sensor
ï· Integrated hybrid designs (RF and
capacitive sensing combined)
ï· Movement sensing applications (user
interaction detection, anti-theft)
RoHS2
Compliant
6 pin TSOT23-6
Representations only,
not actual markings
ï· Projected capacitive
sensing option (self-
capacitance by default)
ï· I2C interface option
(improved compatibility)
ï· Extended controls in I2C mode (setup in
I2C, runtime with standalone output)
ï· Hand-held power on detection (safety
back-off feature using user interaction)
ï· Optional input for synchronized
implementations (input to instruct IC when
to sense)
ï· Synchronization output â failsafe pulses
may be used by the master to synchronize
on. Sensing is done after each pulse
ï· Synchronization input â Sensing is only
done while Sync input is low
ï· Low power sensing: 30Hz (default), 100Hz,
8Hz, 4Hz (sub 10uA mode)
ï· Constant sampling rates during all
power modes with rapidly debounced
output changes
ï· Hold detection for screen activation
ï· On-ear detection
Copyright © Azoteq 2015
All Rights Reserved
TA
-40°C to 85°C
TSOT23-6
IQS231
IQS231 Datasheet v1.3
Check for latest datasheet
Page 1 of 37
November 2015
|
▷ |