HT34-496 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – NEMA 34 High Torque Step Motor

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
HT34-496
NEMA 34 High Torque Step Motor
1pc. - 453.00
50pc. - 339.75
Product Features
2-phase hybrid step motor
High torque design
Standard NEMA 34 dimensions
Optimized for high bus voltage operation
Description
Product Description:
The HT34-496 two-phase stepper motor is designed for use with the STAC5 and STAC6 series of stepper drives
and is suitable for a wide range of motion control applications. The motor is optimized for use with high bus-
voltage drives and comes with an integral 10 ft shielded cable.
The motor is terminated with 8 motor leads plus 1 ground lead making it easy to connect the motor to the drive
depending on the drive voltage being used. For 120 VAC applications the motor leads must be connected in
parallel. For 220 VAC applications the motor leads must be connected in series.
Note: The HT34-496 step motor supersedes the HT34-489 step motor in 120 VAC applications with the STAC6
stepper drives.