HT23-550 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – NEMA 23 High Torque Step Motor

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
HT23-550
NEMA 23 High Torque Step Motor
1pc. - 140.00
50pc. - 105.00
Product Features
2-phase hybrid step motor
High torque design
Standard NEMA 23 dimensions
Optimized for high bus voltage
Description
Product Description:
The HT23-550 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC
input versions only) and is suitable for a wide range of motion control applications. The motor comes with an
integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.
When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads
plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your
choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.
Note: The HT23-550 step motor has been superseded by the HT23-554 step motor for use in all new applications
with STAC6 stepper drives.
This motor has features which do not conform to standard NEMA for gearhead ordering purposes. Stated lead
time for a gearhead ordered with this motor may be longer than shown. Please call for delivery on a gearhead
being ordered with this motor.