HRP-06-S Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 2.5mm pitch/Disconnectable Crimp style connectors

HR CONNECTOR
Radial Tape
2.5mm pitch/Disconnectable Crimp style connectors
JST ₅
• Thin design
• High reliability
• Interchangeability
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #26 to #22
• Applicable PC board thickness: 0.8 to 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
PC board layout (viewed from soldering side) and Assembly layout
Top entry type

^ʶ
NJO
Side entry type
П^ʴɹ

^ʶ
NJO
П^ʴɹ


Top entry type on radial-tape

^ʶ
NJO
П^ʴɹ

Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
1