HFJ11-1G02ERL Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 1x1 Tab-Down Gigabit Short Body RJ45

FastJack^™
1x1 Tab-Down Gigabit Short Body RJ45
RoHS
Compliant
Conflict
FREE
ü
Product Features:
Gigabit (10/100/1000) Ethernet RJ45
IEEE802.3ab Compliant
350uH min OCL at 8mA DC Bias Across the
Full Temp Range
30µ” Gold Plating (min) on Contacts
100% Compliance Testing
1500Vrms Hi-Pot
Proprietary Robust Contact Design
Part Number
Standard Temp
Extended Temp
(0 to 70°C)
(-40 to +85°C)
HFJ11-1G01ERL
HFJ11-E1G01ERL
Circuit
A
LED’s
(L/R)
None
Return Loss (min)
1-40MHz 60MHz 80MHz 100MHz
-18dB -14dB -12dB -10dB
PHY
Drive
Current
HFJ11-1G01E-L11RL HFJ11-E1G01E-L11RL
A
G/G -18dB -14dB -12dB -10dB Current
HFJ11-1G01E-L12RL HFJ11-E1G01E-L12RL
A
G/Y
-18dB -14dB -12dB -10dB Current
HFJ11-1G06ERL
HFJ11-E1G06ERL
B
None -18dB -14dB -12dB -10dB Current
HFJ11-1G06E-L11RL HFJ11-E1G06E-L11RL
B
G/G -18dB -14dB -12dB -10dB Current
HFJ11-1G06E-L12RL HFJ11-E1G06E-L12RL
B
G/Y
-18dB -14dB -12dB -10dB Current
HFJ11-1G11ERL*
HFJ11-E1G11ERL
C None -18dB -14dB -12dB -10dB Current
HFJ11-1G11E-L11RL* HFJ11-E1G11E-L11RL
C
G/G -18dB -14dB -12dB -10dB Current
HFJ11-1G11E-L12RL*
HFJ11-1G16ERL*
HFJ11-1G16E-L11RL*
HFJ11-E1G11E-L12RL
HFJ11-E1G16ERL
HFJ11-E1G16E-L11RL
C
G/Y
-18dB -14dB -12dB -10dB Current
D None -18dB -14dB -12dB -10dB Current
D
G/G -18dB -14dB -12dB -10dB Current
HFJ11-1G16E-L12RL* HFJ11-E1G16E-L12RL
D
G/Y
-18dB -14dB -12dB -10dB Current
HFJ11-1G41ERL*
HFJ11-E1G41ERL
E
None -18dB -14dB -12dB -10dB Voltage
HFJ11-1G41E-L11RL* HFJ11-E1G41E-L11RL
E
G/G -18dB -14dB -12dB -10dB Voltage
HFJ11-1G41E-L12RL* HFJ11-E1G41E-L12RL
E
G/Y
-18dB -14dB -12dB -10dB Voltage
HFJ11-1G46ERL*
HFJ11-E1G46ERL
F
None -18dB -14dB -12dB -10dB Voltage
HFJ11-1G46E-L11RL* HFJ11-E1G46E-L11RL
F
G/G -18dB -14dB -12dB -10dB Voltage
HFJ11-1G46E-L12RL* HFJ11-E1G46E-L12RL
F
G/Y
-18dB -14dB -12dB -10dB Voltage
*Recommended for New Designs
Notes:
1. LED Key : G = Green, Y = Yellow
2. Other LED colors, bi-colors, polarities, and current limiting versions available
3. Unshielded and without ground shield tabs available
4. Part specific datasheets available
5. Tab-up versions avaliable
6. The 1G11 and 1G16 circuits are recommended for new designs when using current drive PHYs
For additional information contact your local representative, or HALO’s support staff at [phone] or [e-mail]