HD-3000S Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Single Channel HD-SDI Adapter

HD-3000S
Single Channel HD-SDI Adapter
The HD-3000S is the depopulate version of HD-3000 by supporting signal chan-
nel input and output.
The HD-3000S converts SD/HD-SDI (SD, HD and 3G) signal to HDMI for driving
HDMI monitors. The HD-3000S provides re-clocked loop through outputs for
“daisy chaining” multiple monitors or other equipments to the same HD-SDI
source. It also supports embedded audio.
Fully compliant with the SMPTE 259M-C, SMPTE 292M, SMPTE 424M, 425M
standards.
Supported Mode :
576i50 (PAL)
480i60 (NTSC)
1035i60 (4:2:2)
1035i59.94 (4:2:2)
720p60 (4:2:2)
720p59.94 (4:2:2)
720p50 (4:2:2)
720p30 (4:2:2)
720p29.97 (4:2:2)
720p25 (4:2:2)
1080p30 (4:2:2)
1080p29.97 (4:2:2)
1080p25 (4:2:2)
1080p24 (4:2:2)
1080p23.98 (4:2:2)
1080psf30 (4:2:2)
1080psf25 (4:2:2)
1080psf24 (4:2:2)
1080psf23.98 (4:2:2)
1080i60 (4:2:2)
1080i59.94 (4:2:2)
1080i50 (4:2:2)
1080p60 (4:2:2)
1080p50 (4:2:2)
Features
1. Supports 1.5Gbits & 3Gbits bit rate input signal support.
2. Single channels input port supported.
3. HD-SDI re-clock loop through output
4. HDMI (v1.3) x 1 output port
5. Stereo embedded audio support
6. On-board power on/off switch
7. AFD (Active Format Description) support
Power Requirements :
+12VDC ±5%, 2.5W
HD-3000S
connected to
SVX-1920
© Digital View Group Ltd 2010 | www.digitalview.com