HA1EV2S1R Datasheet, PDF (1/23 Pages) List of Unclassifed Manufacturers – L6 Series Miniature Switches and Pilot Devices

Switches & Pilot Devices
ø16mm - L6 Series
L6 Series — Miniature Switches and Pilot Devices
Key features of the 5/8” L6 Series include:
• 5/8” (16mm) mounting holes
• Locking lever removable contact blocks
• Solder terminal or PCB terminal options
• Available assembled or as sub-components
• Worldwide approvals
• Incandescent or LED illumination
• Snap action contacts
UL Recognized
File No. E55996
CSA Certified
File No. LR21451
Registration No. R9551089 (E-stops)
Registration No. J9551458 (all other switches)
Registration No. R95650511 (Pilot Lights)
Conforming to Standards
Operating Temperature
Vibration Resistance
Shock Resistance
Mechanical Life
Degree of Protection
Dielectric Strength
Insulation Resistance
Rated Insulation Voltage
Rated Thermal Current
Contact Resistance
Rated Operating Current
Minimum Recommended Load (reference value for silver
contacts)
Terminal Style
Contact Form
Contact Material
Electrical Life (at full load)
Lamp Current Draw
Lamp Life
EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 N0.14
Operation: –25 to +55°C (without freezing), 45 to 85% RH
Storage: -30 to +80°C (without freezing)
5 to 55Hz, 1.0 peak-peak amplitude max
Operating limit: 100 m/sec² (approximately 10G)
Damage limit: 1000 m/sec² (approximately 100G)
Momentary pushbuttons 2,000,000 operations minimum
All others: 250,000 operations minimum
IP65 (conforming to IEC 60529)
Switch unit: between live and ground: 2500 volt AC, 1 minute
between terminals of different poles: 2500 volt AC, 1 minute
between terminals of same pole: 1000 volt AC, 1 minute
Illumination unit: between live part and ground: 2500 volt AC, 1 minute
100MΩ minimum (using 500V DC megger)
250V AC/DC
Gold Contacts (pcb): 3A
Silver Contacts (solder): 5A
50Ω maximum initial value
AC resistive
AC inductive
DC resistive
DC inductive
Silver Contacts
(Solder Terminals)
30V 125V 250V
—
5A
2A
—
2A
1.5A
3A
0.4A
—
1A
0.2A
—
Gold Clad Contacts
(PCB terminals)
30V 125V
AC inductive -
0.1A
DC resistive 0.1A
—
5V AC/DC, 1mA
0.110” Solder Tab /PCB
Snap Action, Double Throw
Solder Tab: Pure Silver /PCB: Gold Plated Silver
Momentary pushbuttons: 100,000 operations minimum (1800 operations / hour)
All others: 100,000 operations minimum (1200 operations / hour)
5V DC LED: 8mA
6V AC/DC LED: 7mA
12V AC/DC LED: 8mA
24V AC/DC LED: 8mA
120V AC = 8mA
6V AC/DC incandescent: 100 mA
12V AC/DC incandescent: 50 mA
24V AC/DC incandescent: 25 mA
Incandescent: 2000 hours./LED 50,000 hours. (on pure DC, half-life intensity)
USA: 800-262-IDEC Canada: 888-317-IDEC
471