H20DB-37-SS-500-ABZC Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Model H20® Incremental Encoder

Model H20^® Incremental Encoder
The H20 is an extremely rugged encoder designed to economically
fill the resolution range up to 4096 cycles per turn. This compact
unit features a shock resistant disc, heavy duty bearings, and EMI
shielding. The H20 conforms to NEMA 4 and 13 requirements. The
H20 is also available in a hub shaft style with a flexmount (inset) for
easy mounting directly to small motors. Typical applications of the
H20 include machine control, process control, agricultural machin-
ery, textile equipment, robotics, food processing, and metering.
Special Models of the H20 Incremental Encoder are available with one or
more of the following certifications. Consult factory for details.
EN 55011
and EN 61000-6-2
U.S. Standards Class I, Group A,B,C & D;
Class II Group E,F & G
UL 12.0035X
Canadian Standards
UL 12.0082X
C
Class I, Zone 0, Group IIC
CENELEC
II 1 G Ex ia IIB/IIC T4
II 3 G Ex nA IIB T3 Gc
II 3 G Ex nA IIB T4 Gc
Class I, Div 2, Group A,B,C & D;
Class II, Div 2, Group F & G
Mechanical
Specifications
Shaft Diameter: 1/4” thru 3/8” and metric
versions. Hollow shaft, hub shaft or thru-shaft
versions available.
Flat On Shaft: 0.75 x 0.03 deep
Shaft Loading: up to 40 lbs. axial and
40 lbs. radial
Shaft Runout: .001 T.I.R. maximum
Starting Torque at 25°C: 1.0 in-oz maxi-
mum without shaft seal; 2.5 in-oz maximum
with shaft seal; 4.0 in-oz thru-shaft
Bearings: 52100 bearing steel
Shaft material: 303 stainless steel
Bearing Housing: Die cast aluminum with
iridite finish; stainless steel (special featur­e)
Cover: Die cast aluminum with protective
finish (For MS or CS terminations), otherwise
drawn aluminum with protective finish; stain-
less steel (special feature)
Bearing Life: 1.5 X 10⁹ revs at rated load
(10,000 hrs at 2500 RPM)
Maximum RPM: 8,000
(see Frequency Response)
Moment of Inertia: 2.0 x 10^-4 oz-in-sec²
Weight: 9 oz. typical
Electrical­
Specifications
Code: Incremental
Output Format: 2 channels in quadrature,
1/2 cycle index gated with negative B chan-
nel as standard. Ungated index when 3904
is specified as the output device
Cycles per Shaft Turn: 1 to 4096 (see
table A) For resolutions above 1024 contact
BEI for interpolation options
Supply Voltage: 5 to 28 VDC available
Current Requirements: 100 mA typical +
output load, 25O mA (max)
Voltage/Output: (see note 5)
28V/V: Line Driver, 5–28 VDC in, Vout = Vin
28V/5: Line Driver, 5–28 VDC in, Vout = 5 VDC
28V/OC: Open Collector, 5–28 VDC in, OCout
Protection Level: reverse, overvoltage and
output short c­ ircuit (see note 5)
Frequency Response: 100 KHz (up to
1024 cpt; 400 KHz with interpolation option
(see note 7)
Output Terminations:
see Table 1
Note: Consult factory for other
electrical options
Environmental
Specifications
Enclosure Rating: NEMA 4 & 13 (IP66)
when ordered with shaft seal (on units with
an MS connector) and a cable gland (on
units with cable termination)
Temperature: Operating, 0° to 70°C;
extended temperature testing available
(see note 8); Storage, -25° to 90°C unless
extended temperature option called out
Shock: 50 g’s for 11 msec duration
Vibration: 5 to 2000 Hz @ 20 g’s
Humidity: 98% RH without condensation
NOTES & TABLES: All notes and tables
referred to in the text can be found on the
back of this page.
H20 Incremental Ordering Options for assistance call 800-350-2727
Use this diagram, working from left to right to construct your model number (example: H20DB-37-SS-500-ABZC-28V/V-SM18).
All notes and tables referred to can be found on pages the back of this page.
H20
TYPE:
H = Heavy Duty
20 = 2.00” DIA.
X=
Express
Encoder
HOUSING CONFIG:
D = Square Flange
E = 2.00 Dia.
See Dimensions
Shaft DIA:
25
=
0.2497
0.2495
37 = ^0.3747
0.3745
39 = ^0.3935
0.3932
PILOT CONFIG:
A=1.181
(30mm) Female
(No shaft seal available)
B =1.25
Face Mount:
F5, F12, F28
Blank = None
See Dimensions
SHAFT TYPE:
Cycles Per Turn:
(Enter Cycles)
See table A
No. of Channels:
Output
Termination
Location:
E = End
S = Side
Hazardous
Area Ratings:
Blank = None
EX = Intrinsically Safe
NI = Non-Incendive
Contact factory for
TS=Thru Shaft
A = Single Channel
Voltage/output:
voltage options
HS=Hollow Shaft
AB = Dual Quad. Ch.
28V/V = 5–28Vin/out
HBS=Hub Shaft
ABZ = Dual with Index
28V/5 = 5–28Vin/5Vout
Blank = single ended _{SHAFT Seal: AZ = Single with Index} 28V/OC = 5–28Vin/OCout
shaft (standard) _{SS = Shaft Seal}
See note 3
(must use pilot B, except HBS
Complements:
units can take SS with pilot A)
C = Complementary Outputs
SPECIal features:
S = Special features
specified on purchase
order.(Consult factory)
See note 6
See note 2
Blank = None
Output Termination:
See note 4
M14 = MS3102R14S-6P
EXPRESS ENCODERS^®  Items highlighted with are standard Express Encoders and ship in one to three days.
M16 = MS3102R16S-1P
M18 = MS3102R18-1P
T2 option is available as a standard H20 Express Encoder.
C= Pigtail Cable
CS =Cable with Seal (Side or End Term)
Add cable length (i.e., C18=18” cable)
Tel: [phone] | Fax: [phone]
See table 1 & note 9
7230 Hollister Ave., Goleta, CA 93117-2807 | www.beisensors.com
Specification No. 02055-001   Rev.08-13
These commodities, technology or software if exported from the United States must be in accordance with the Bureau of Industry, and Security, Export Administration regulations. Diversion contrary to U.S law is prohibited.