GHR-03V-S Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 1.25mm pitch/Disconnectable Crimp style connectors

GH CONNECTOR
Emboss Tape
1.25mm pitch/Disconnectable Crimp style connectors
Developed for PDP, LCD or small
electronics equipment.
This low insertion force type connector
realizes easier mating operation. The basic
concept of the contact part of this
connector is equivalent to the performance
proven SHL connector.
• Secure locking structure
• Contact lock structure
• Prevention of contact deformation
• Clear engagement click sounds
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #26)
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 30m Ω max.
After environmental testing/ 50m Ω max.
• Insulation resistance: 100M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: Conductor size/ AWG #30 to #26
Insulation O.D./ 0.8 to 1.0mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
Top entry type
Side entry type

^ʶ



^ʶ




^ʶ



^ʶ



Header outline
ʶ





^ʶ


Header outline
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ±0.05mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.
Contact

^ʶ



^ʶ









Model No.
SSHL-002T-P0.2
Applicable wire
NN^
"8(
ʙ
ʙ
Material and Finish
Insulation O.D.
(mm)
Q'ty / reel
ʙ
 


Phosphor bronze, tin-plated (reflow treatment)
RoHS compliance
Note: 1. Contact JST for gold-plates products.
2. This contact can be applied only for GH connector.
SSHL-003( )-P0.2 cannot be applied for GH connector.
$POUBDU
$SJNQJOH

NBDIJOF $SJNQ
BQQMJDBUPS
"QQMJDBUPS
%JFT
$SJNQ
BQQMJDBUPS
XJUI
EJFT
SSHL-002T-P0.2 "1,/
.,4-

ʵ

.,44)-
"1-.,
44)-

ʵ

ʵ

1