GF1400SL Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Thermally Conductive, Self-Leveling, Liquid Gap Filling Material

Gap Filler 1400SL
Thermally Conductive, Self-Leveling, Liquid Gap Filling Material
Features and Benefits
• Thermal Conductivity: 1.4 W/m-K
• Self-Leveling
• Very Soft
• Vibration Dampening
Gap Filler 1400SL is a two-part, thermally
conductive, silicone based, liquid gap filling
material. This material has an extremely low
viscosity to enable self-leveling and filling of
voids resulting in excellent thermal transfer.
Unlike cured thermal pad materials, a liquid
approach offers infinite thickness variations
with little or no stress to the sensitive
components during assembly. As cured,
Gap Filler 1400SL provides a soft, thermally
conductive, form-in-place elastomer that is
ideal for fragile assemblies and filling unique
and intricate gaps.
Gap Filler 1400SL exhibits low level natural
tack characteristics and is intended for use in
applications where a strong structural bond
is not required.
Dispensing
Due to its low viscosity nature,
Gap Filler 1400SL will settle upon storage.
Each container must be thoroughly mixed
before combining Part A and Part B via static
mixer and dispensing into application.
TYPICAL PROPERTIES OF GAP FILLER 1400SL
PROPERTY
IMPERIAL VALUE METRIC VALUE TEST METHOD
Color / Part A
Yellow
Yellow
Visual
Color / Part B
White
White
Visual
Viscosity, As Mixed (cps) (1)
5000
5000
ASTM D2196
Density (g/cc)
2.5
2.5
ASTM D792
Mix Ratio
1:1
1:1
—
Shelf Life @ 25°C (months) (2)
6
6
—
PROPERTY AS CURED
Color
Yellow
Yellow
Visual
Hardness (Shore 00) (3)
40
40
ASTM D2240
Heat Capacity (J/g-K)
0.9
0.9
ASTM D1269
Siloxane Content, ∑D₄-D₁₀ (ppm)
40
40
—
Continuous Use Temp (°F) / (°C)
-76 to 392
-60 to 200
—
ELECTRICAL AS CURED
Dielectric Strength (V/mil)
250
250
ASTM D149
Dielectric Constant (1000 Hz)
6.0
6.0
ASTM D150
Volume Resistivity (Ohm-meter)
10¹¹
10¹¹
ASTM D257
Flame Rating
V-O
V-O
U.L. 94
THERMAL AS CURED
Thermal Conductivity (W/m-K)
1.4
1.4
ASTM D5470
CURE SCHEDULE
Working Time @ 25°C (4)
120 min
120 min
—
Cure @ 25°C (hrs) (4)
24
24
—
Cure @ 100°C (min) (4)
30
30
—
(1) Brookfield Rheometer, Part A and Part B mixed 1:1 ratio.
(2) See application note for storage and handling recommendations.
(3) Thirty second delay value, Shore 00 scale.
(4) Parallel Plate Rheometer, see reactivity application note.
Typical Applications:
• Automotive electronics
• Lighting
• Telecommunications
• Power Supplies
• Encapsulating semiconductors and magnetic components with heatsink
• Silicone sensitive applications
Configurations Available:
• Available for order in 1200cc kits and 7 gallon pail formats
Building a Part Number
Standard Options
GF1400SL – 00 – 120 – 1200cc –
NA
NA = Selected standard option. If not selecting a standard
option, insert company name, drawing number, and
revision level.
Kits: 1200cc = 1200.0cc, or 7G = 7 gallon
Working Time: 120 = 120 minutes
00 = No spacer beads
GF1400SL = Gap Filler 1400SL Material
Note: To build a part number, visit our website at www.bergquistcompany.com.
The Bergquist Company -
North American Headquarters
18930 West 78th Street
Chanhassen, MN 55317
Phone: [phone]
Fax: [phone]
www.bergquistcompany.com
The Bergquist Company -
European Headquarters
Netherlands
Phone: [phone]
Fax: [phone]
The Bergquist Company -
Asia Headquarters
Hong Kong
Phone: [phone]
Fax: [phone]
All statements, technical information and recommendations herein are based on tests we believe to be reliable, and
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to
replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product
for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR
MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT,
INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR
THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not
contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer.
PDS_GF1400SL_0715