GDS02 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Dip Switches “End to End Stackable Through Hole and Surface Mount

GD Series Dip Switches “End to End Stackable”
Through Hole and Surface Mount
FEATURES:
• Conventional gold wiping contact system
MATERIAL SPECIFICATIONS:
Moving Contact
Gold over nickel over copper alloy
A
• Available in PC and surface mount configurations
• Traditional tape seal standard
Fixed Contact
Base Material
Cover Material
Gold over copper alloy
PPS UL94V-0
PPS UL94V-0
• 95% Minimum solder coverage (90/10 tin lead)
Actuator Material
High temperature polyester/polyamide
• Withstands wave soldering temperature of 245°C for 3-5 seconds
• Heat deflection temperature of 260°C for surface mount compatibility
Terminal
Tin lead plated over nickel over
copper alloy
• End stackable (GDS version)
• Auto-insertable (GDS and GDB version)
• Vacuum pick and place compatible (GDS, GDB and GDH)
• Half pitch .050” terminal spacing (GDH version)
• Available in optional tape & reel packaging
ENVIRONMENTAL SPECIFICATIONS:
Operating Temperature
-30°C to +85°C
Storage Temperature
-45°C to +100°C
Solder Heat Resistance
See page M6-7
TYPICAL PERFORMANCE CHARACTERISTICS:
Contact Rating
0.4 VA 25ma @ 24 VDC
Initial Contact Resistance 100 Milliohms max.
Insulation Resistance
100 Megohms min. @ 250 VDC
Dielectric Strength
300 VAC
Life Expectancy
1,000 Cycles
Operating Force
60-600 Grams
End to End Stackable!
GDS
Low Profile Slide Actuator
.169
(4.30)
.047
(1.20)
.015
(0.40)
.004/.012
(0.10/0.30)
.106
(2.70)
.232
(5.90)
.244
(6.20)
.047
(1.20)
ON
.024
(0.60)
.100
(2.54)
.047
(1.20)
.106
(2.70)
.100
(2.54)
TYP.
.024±.004
(0.61)±(0.10)
TYP.
.047±.008
(1.20)±(0.20)
TYP.
.228
(5.80)
.335
(8.50)
.232
(5.89)
.010
(0.25)
.228
(5.79)
.035±.008
(0.89) (±0.20)
.366±.020
(9.30) (±0.51)
1
.100
(2.54)
PC
S
PC Model
GDS02
GDS04
GDS06
GDS08
GDS10
S Model
GDS02S
GDS04S
GDS06S
GDS08S
GDS10S
Poles Length Dim. M
2 .194(4.94) .100 (2.54)
4 .394(10.02) .300(7.62)
6 .594(15.10) .500(12.7)
8 .794(20.18) .700(17.78)
10 .994(25.26) .900(22.86)
.024
(0.60)
LENGTH
DIM. M
L
.100
(2.54)
TYP.
8
GDS08
.060
(1.52)
MIN.
.325
(8.26)
.409
(10.39)
MIN.
S
.240
(6.10)
MAX.
ø.031
(0.80)
TYP.
.300
PC
(7.60)
See pages M2-M4 for application specific indexing.
Need more technical information?
Consult your Thomas & Betts
sales office listed on the back cover
A3
Thomas & Betts
8155 T&B Blvd.
Memphis, TN 38125
[phone] FAX [phone]