G6SU212DC Datasheet, PDF (1/9 Pages) List of Unclassifed Manufacturers – SURFACE-MOUNTING SIGNAL RELAY-G6S

TSeuxrtface-Mounting Signal Relay – G6S
Surface-Mounting DPDT Relay
■ ROHS compliant.
■ Long terminals ideal for soldering and
mounting reliability.
■ Space-saving inside-L terminal.
■ High dielectric strength between coil and
contacts (2,000 VAC), and between contacts
of different polarity (1,500 VAC).
■ High impulse withstand voltages between coil
and contacts, and between contacts of
different polarity (2,500 V, 2 10 µs: Bellcore
requirements).
■ Low power consumption (140 mW).
■ Bifurcated crossbar contact (Au-clad) and
Fully sealed construction for high reliability.
■ Applicable to IRS.
■ High sealability after IRS.
■ Ultra-miniature at 15 x 7.5 x 9.4 mm
(L x W x H).
■ Through-hole terminal is available
■ EN60950 Supplementary Insulation-certified
type is available.
Ordering Information
DPDT
Fully
sealed
Classification
Single-side
Stable
Through-hole terminal
G6S-2
Surface mounting
terminal
Inside-L G6S-2G
Outside-L G6S-2F
Single-winding Double-winding Single-side stable
latching
latching
EN60950/EN41003
G6SU-2
G6SK-2
G6S-2-Y
G6SU-2G
G6SK-2G
G6S-2G-Y
G6SU-2F
G6SK-2F
G6S-2F-Y
Note: 1. When ordering, add the rated coil voltage to the model number.
Example: G6S-2F 12 VDC
Rated coil voltage
2. When ordering tape packing, add -TR" to the model number.
Example: G6S-2F-TR 12 VDC
Tape packing
Be sure since -TR" is not part of the relay model number, it is not marked on the relay case.
Model Number Legend
1. Relay Function
None: Single-side stable
U: Single-winding latching
K: Double-winding latching
2. Contact Form
2: DPDT
3. Terminal Shape
None: Through-hole terminal
G: Inside-L surface mounting terminal
F: Outside-L surface mounting terminal
4. Approved Standards
None: UL/CSA
Y: EN60950
5. Rated Coil Voltage
4.5, 5, 12, 24 VDC
231