G287 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Multipurpose Boxes

Multipurpose Boxes
IP65, Polycarbonate Material
Features:
• The LID and base incorporate a tongue and groove sealing
system with a neoprene gasket
• Wall mounting holes and LID fixing screws are outside the
sealing area thus preventing the ingress of moisture and dust
• Designed to IP 65 of IEC 529 and nema 4 (dust and hoseproof)
• Internal guide slots for mounting PCB assemblies vertically
• Bosses on internal base allow fixing of PCB's horizontally or
connection of terminals, etc into threaded brass inserts
• LID fixing screw are M-4 stainless steel (nonmagnetic) into
threaded brass inserts
• High impact ABS material moulded in dark grey colour. They
are easily drilled or punched. Making them Ideal for use in the
electrical and electronics industries as circuit enclosures and
junctions boxes
Specification Table
Height
50
80
120
Width
52
82
160
200
120
160
160
Depth
35
55
75
90
60
90
Wall
Thickness
3
Moulded In
Light grey
(IP65, polycarbonate material)
Operating
Temperature
Part Number
G250
G256
G258
-40°C to +125°C
G269
G279
G287
G288
Dimensions : Millimetres
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
Page <1>
07/05/12 V1.1