FT6000 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Smart Transceivers for the IzoTTM Platform

®
FT 6000
Smart Transceivers for the IzoT^TM Platform
FT 6000 Key Features
• 3.3V operation. 80MHz system clock,
64KB RAM and 16KB ROM on-chip
memories
• Support for larger external flash
memories, up to 256KB applications
• Supports up to 254 Network Variables
(NVs) and 127 aliases. up to 254
address table entries (16-fold increase)
• Low-cost surface mount FT-X3
Communications Transformer.
• Supports polarity-insensitive free
topology star, daisy chain, bus, loop,
or mixed topology wiring. Very high
common-mode noise immunity.
• User-programmable interrupts ,
hardware UART, 12 I/O pins with 35
programmable standard I/O models
• Flash file system for data logging and
other applications requiring persistent
storage
• Unique 48-bit IEEE MAC ID
• 7 mm x 7 mm 48-pin QFN package,
-40°C to +85°C.
The FT 6000 family of Smart
application (APP) processor, respectively
Transceivers is the next-generation
(see Figure 1). At higher system clock
system-on-chips for modernizing and
rates, a fourth processor called the IRQ
consolidating smart control networks.
CPU can be used to handle interrupts.
It is a key product in Echelon’s IzoT™
platform — the most comprehensive
and open control networking platform
for the Industrial Internet of Things
(IIoT). It offers options for backward
NVM
(SPI)
compatibility with LONWORKS^® while
12
/
I/O
2-6
Serial
/
Memory
Interface
Comm
Port
5
/
External
Transformer
IRQ CPU
adding native IP addressing at the
device level and consolidating multiple
APP CPU
control protocols on the same device
carried over the reliable and proven Free
Topology channel. It is designed to bring
RAM
(64K x 8)
NET CPU
unprecedented flexibility and openness
while lowering development and
ROM
(16K x 8)
MAC CPU
device costs.
The FT 6000 Smart Transceiver family
integrates a high-performance Neuron^®
core with a free topology twisted-pair
transceiver. Combined with the proven
FT-X3 Communications Transformer and
inexpensive flash memory, the FT 6000
Smart Transceivers provide a very flexible,
low-cost, feature enhanced LONWORKS
or IzoT/IP or BACnet/IP solution all within
the same device.
The FT6000 series Smart Transceiver
includes three independent 8-bit logical
processors to manage the physical
MAC layer, the network, and the user
application. These are called the Media-
Access Control (MAC) processor, the
network (NET) processor, and the
Clock, Reset,
and Service
JTAG
5
Figure 1: FT 6000
Smart Transceiver Chip
The FT 6000 Smart Transceiver supports
polarity-insensitive cabling using a star,
bus, daisy-chain, loop, or combination
topology (see Figure 2). Thus, installers
don’t have to follow a strict set of wiring
rules imposed by other networking
technologies. Instead, they can install
wiring in the fastest and most cost-
effective manner, thereby saving time and
Preliminary
www.echelon.com