FT24C512A Datasheet, PDF (1/17 Pages) List of Unclassifed Manufacturers – Two-Wire Serial EEPROM

Fremont Micro Devices
Two-Wire Serial EEPROM
512K (8-bit wide)
FT24C512A
FEATURES
 Low voltage and low power operations:
 FT24C512A:
V_CC = 1.8V to 5.5V
 Maximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively).
 128 bytes page write mode.
 Partial page write operation allowed.
 Internally organized: 65,536×8 (512K).
 Standard 2-wire bi-directional serial interface.
 Schmitt trigger, filtered inputs for noise protection.
 Self-timed write cycle (5ms maximum).
 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) compatibility.
 Automatic erase before write operation.
 Write protect pin for hardware data protection.
 High reliability: typically 1,000,000 cycles endurance.
 100 years data retention.
 Industrial temperature range (-40^o C to 85^o C).
 Standard 8-pin DIP/SOP/WSOP/MSOP/TSSOP Pb-free packages.
DESCRIPTION
The FT24C512A series are 524,288 bits of serial Electrical Erasable and Programmable Read Only
Memory, commonly known as EEPROM. They are organized as 65,536 words of 8 bits (one byte) each.
The devices are fabricated with proprietary advanced CMOS process for low power and low voltage
applications. These devices are available in standard 8-lead DIP, 8-lead SOP/WSOP/MSOP and 8-lead
TSSOP packages. A standard 2-wire serial interface is used to address all read and write functions. Our
extended VCC range (1.8V to 5.5V) devices enables wide spectrum of applications.
PIN CONFIGURATION
Pin Name
A2, A1, A0
SDA
SCL
WP
NC
Pin Function
Device Address Inputs
Serial Data Input / Open Drain Output
Serial Clock Input
Write Protect
No-Connect
Table 1
© 2009 Fremont Micro Devices Inc.
DS3009E-page1