FT24C1024A Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – Two-Wire Serial EEPROM

Fremont Micro Devices
FT24C1024A
Two-Wire Serial EEPROM
1024K ( 8-bit wide )
FEATURES
 Low voltage and low power operations:
 FT24C1024A:
V_CC = 1.8V to 5.5V
 Maximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively).
 256 bytes page write mode.
 Partial page write operation allowed.
 Internally organized: 131,072 X 8 (1024K).
 Standard 2-wire bi-directional serial interface.
 Schmitt trigger, filtered inputs for noise protection.
 Self-timed programming cycle (5ms maximum).
 Automatic erase before write operation.
 Write protect pin for hardware data protection.
 High reliability: typically 1,000,000 cycles endurance.
 40 years data retention.
 Industrial temperature range (-40^o C to 85^o C).
 Standard 8-pin DIP/SOP Pb-free packages.
DESCRIPTION
The FT24C1024 series are 1,048,576 bits of serial Electrical Erasable and Programmable Read Only
Memory, commonly known as EEPROM. They are organized as 131,072 words of 8 bits (one byte) each.
The devices are fabricated with proprietary advanced CMOS process for low power and low voltage
applications. These devices are available in standard 8-lead DIP, and 8-lead SOP packages. A standard
2-wire serial interface is used to address all read and write functions. Our extended V_CC range (1.8V to
5.5V) devices enables wide spectrum of applications.
PIN CONFIGURATION
Pin Name
A2, A1
SDA
SCL
WP
NC
Pin Function
Device Address Inputs
Serial Data Input / Open Drain Output
Serial Clock Input
Write Protect
No-Connect
© 2012 Fremont Micro Devices Inc.
DS24C1024-A0--page1