FT24C04A-ULR-T Datasheet, PDF (1/20 Pages) List of Unclassifed Manufacturers – Two-Wire Serial EEPROM 4K, 8K and 16K (8-bit wide)

24C04A, 24C08A, 24C16A
Two-Wire Serial EEPROM
4K, 8K and 16K (8-bit wide)
FEATURES
 Low voltage and low power operations:
 FT24C04A/08A/16A:
V_CC = 1.8V to 5.5V
 Maximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively).
 16 bytes page write mode.
 Partial page write operation allowed.
 Internally organized: 512  8 (4K), 1024  8 (8K), 2048  8 (16K).
 Standard 2-wire bi-directional serial interface.
 Schmitt trigger, filtered inputs for noise protection.
 Self-timed Write Cycle (5ms maximum).
 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility.
 Automatic erase before write operation.
 Write protect pin for hardware data protection.
 High reliability: typically 1, 000,000 cycles endurance.
 100 years data retention.
 Industrial temperature range (-40^o C to 85^o C).
 Standard 8-pin DIP/SOP/TSSOP/DFN/MSOP and 5-pin SOT-23/TSOT-23 Pb-free packages.
DESCRIPTION
The FT24C04A/08A/16A series are 4096/8192/16384 bits of serial Electrical Erasable and Programmable Read Only
Memory, commonly known as EEPROM. They are organized as 512/1024/2048 words of 8 bits (1 byte) each. The
devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These
devices are available in standard 8-lead DIP, 8-lead SOP, 8-lead TSSOP, 8-lead DFN, 8-lead MSOP, and 5-lead SOT-
23/TSOT-23 packages. A standard 2-wire serial interface is used to address all read and write functions. Our
extended V_CC range (1.8V to 5.5V) devices enables wide spectrum of applications.
PIN CONFIGURATION
Pin Name
A2, A1, A0
SDA
SCL
WP
NC
Pin Function
Device Address Inputs
Serial Data Input / Open Drain Output
Serial Clock Input
Write Protect
No-Connect
© 2009 Fremont Micro Devices Inc.
DS3001M-page1