FR101G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere)

RoHS
FR101G-107G
FAST RECOVERY GLASS PASSIVATED RECTIFIER
WEJ ELECTRONIC CO.,LTD FEATURES
Fast switching for high efficeency
High current surge capability
Low leakage
Glass passivated chip junction
High temperature soldering guaranteed:
260^oC/10 seconds/0.375 (9.5mm)lead length
at 5 lbs (2,3kg) tension
MECHANICAL DATA
Case:Transfer molded plastic
Epoxy:UL94V-0 rate flame retardant
Polarity:Color band denotes cathode end
Lead:Plated axial lead ,solderable per MIL-STD-202E
method 208c
Mounting position:Any
Weight:0.012 ounce,0.33 gram
VOLTAGE RANGE
CURRENT
1.0(25.4)
MIN
50 to 1000 Volts
1.0 Ampere
.034(0.9) _DIA.
.028(0.7)
DO-41
.205(5.2)
.165(4.2)
1.0(25.4)
MIN
.107(2.7) _DIA
.080(2.0)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase,half wave,60Hz,resistive or inductive load.
For capacitive load derate current by 20%
SYMBOLS
FR
101G
FR
102G
FR FR
103G 104G
FR
105G
FR
106G
FR
107G
UNITS
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
50 100 200 400 600 800 1000 Volts
35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
50 _{100 200 400 600 800 1000} Volts
Maximum Average Forward Rectified Current
0.375 (9.5mm) lead length at TA=55 ^oC
I ( AV )
1.0
Amp
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 1.0A VF
Maximum DC Reverse Current
at rated DC blocking voltage
TA=25 ^oC
TA=125 ^oC
IR
30
Amps
1.3
Volts
5.0
Amps
100
Maximum Reverse Recovery Time(NOTE3)
trr
150
250
500
nS
Typical Junction Capacitance(NOTE1)
CJ
Typical Thermal Resistance(NOTE2)
R JA
15
pF
50
O_C/W
Operating and Storage Temperature Range
TJ,TSTG
-65 to +150
O_C
NOTES:
1.Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2.Thermal Resistance from Junction to Ambient at 0.375 (9.5mm) lead length,P.C.board mounted.
3.Test Conditions:IF=0.5A,IR=1.0A,Irr=0.25A.
WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[e-mail]