FN9260-10-06 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – General Purpose Power Entry Module with Fuses

DATASHEET IEC Inlet Filters FN 9260
General Purpose Power Entry Module with Fuses
Rated currents up to 10 A
For one or two fuses
Optional safety version (A type)
Complies with IEC/EN 60601-1
Snap-in versions (S type)
Approvals
Technical specifications
Maximum continuous operating voltage
Operating frequency
Rated currents
High potential test voltage
Protection category
Temperature range (operation and storage)
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/230V (Mil-HB-217F)
Fuse holder
250 VAC, 50/60 Hz
dc to 400 Hz
1 to 10 A @ 40 °C max.
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec (standard types)
P –> N 1700 VDC for 2 sec (B types)
IP40 according to IEC 60529
-25 °C to +85 °C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94 V-2 or better
2,200,000 hours
1 or 2 fuses (Ø 5 x 20 mm)
The FN 9260 power entry module combines an IEC
inlet, mains filter with excellent filter attenuation and
fuses in a small form factor. Choosing FN 9260
product line brings you rapid availability of a
standard filter associated with the necessary safety
acceptances. Standard IEC connector filters are a
practical solution helping you to pass EMI system
approval in a short time. A wide selection on
amperage ratings, output connections, mounting
possibilities and filters for medical applications are
designed to offer you the desired solution.
Features and Benefits
Exceptional conducted attenuation performance,
based on chokes with high saturation resistance
and excellent thermal behavior.
B types comply with the requirements of IEC/EN
60601-1 for creepage and clearance, leakage current
and high potential testing.
Versions up to 10 A are available with fuse holder for
one or two fuses.
Custom-specific versions are available on request.
Typical applications
Portable electrical and electronic equipment
Medical equipment
Small to medium-sized machines and household
equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
Typical electrical schematic