FN9260-1-06 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – General Purpose Power Entry Module with Fuses

General Purpose Power Entry Module
with Fuses
IEC Inlet Filters
FN 9260
n Rated currents up to 10A
n For one or two fuses
n Optional safety version (A type)
n Optional medical versions (B type)
according to IEC/EN 60601-1
n Snap-in versions (S type)
Approvals
Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
High potential test voltage:
Protection category:
Temperature range (operation and storage):
Design corresponding to:
Flammability corresponding to:
MTBF @ 40°C/230V (Mil-HB-217F):
Fuse holder:
250VAC, 50/60Hz
dc to 400Hz
1 to 10A @ 40°C max.
P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 760VAC for 2 sec (standard types)
P –> N 1700VDC for 2 sec (B types)
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94V-2 or better
2,200,000 hours
1 or 2 fuses (Ø5 x 20mm)
Typical electrical schematic
FN 9260 (B types without Y-capacitors)
Cx
R
2xL
2xCy
N
N‘
PE
PE
P
Line
P‘
Load
FN 261
Cx
R
2xL
2xCy
N
N‘
PE
PE
P
Line
P‘
Load
The FN 9260 power entry module combines
an IEC inlet, mains filter with excellent filter
attenuation and fuses in a small form factor.
Choosing FN 9260 product line brings you
rapid availability of a standard filter associ-
ated with the necessary safety acceptances.
Standard IEC connector filters are a practical
solution helping you to pass EMI system
approval in a short time. A wide selection
on amperage ratings, output connections,
mounting possibilities and filters for medical
applications are designed to offer you the
desired solution.
Features and benefits
Typical applications
n Exceptional conducted attenuation
n Portable electrical and electronic
performance, based on chokes with high
equipment
saturation resistance and excellent thermal n Medical equipment
behavior.
n Small to medium-sized machines and
n B types comply with the requirements of
household equipment
IEC/EN 60601-1 for creepage and clea-
n Single-phase power supplies, switch-mode
rance, leakage current and high potential
power supplies
testing.
n Test and measurement equipment
n Versions up to 10A are available with
fuse holder for one or two fuses.
n Custom-specific versions are available on
request.