FN9246-16-06 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – High Performance IEC Inlet Filter

DATASHEET IEC Inlet Filters FN 9246
High Performance IEC Inlet Filter
Rated currents up to 20 A
Optional medical versions (B type)
Rear mounting
Excellant attenuation in the lower
frequency range
Technical specifications
Maximum continuous operating voltage
Operating frequency
Rated currents
Approvals by rated current
High potential test voltage
Protection category
Temperature range (operation and storage)
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/230V (Mil-HB-217F)
250 VAC, 50/60 Hz
dc to 400 Hz
1 to 20 A @ 50 °C
1 to 10 A (Semko)
16 A (Semko) for 16 and 20 A types
1 to 20 A (UL, CSA)
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 1100 VAC for 2 sec (1 to 10 A types)
P –> N 1100 VDC for 2 sec (16 and 20 A types)
IP40 according to IEC 60529
-25 °C to +85 °C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94 V-2 or better
1,600,000 hours
Approvals
The FN 9246 IEC inlet filter combines an IEC inlet and
mains filter with excellent filter attenuation in a small
form factor. Choosing the FN 9246 product line brings
you the rapid availability of a standard filter
associated with the necessary safety acceptances.
Standard IEC connector filters are a practical solution
helping you to pass EMI system approval in a short
time. A wide selection on current ratings and low
leakage versions for medical applications are
designed to offer you the desired solution.
Features and benefits
Excellent conducted attenuation performance,
based on chokes with high saturation resistance
and excellent thermal behavior
Rear mounting
Optional low leakage current versions for medical
applications
Rated currents up to 20 A
Custom-specific versions are available on request
Typical applications
Electrical and electronic equipment
Small to medium-sized machines and household
equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
Building automation
Medical equipment
Lighting application
Typical electrical schematic