FN9222-15-06 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – General Performance IEC Inlet Filter

General Performance IEC Inlet Filter
IEC Inlet Filters
FN 9222
n Rated currents up to 20A
n Excellent performance/size ratio
n Optional medical versions (B type)
according to IEC/EN 60601-1
n Snap-in versions (S and S1 type)
n Hot inlet versions (HI type)
n Optional overvoltage protection
(Z type)
Approvals
except HI-types
Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
Approvals by rated current:
High potential test voltage:
Protection category:
Temperature range (operation and storage):
Design corresponding to:
Flammability corresponding to:
Surge pulse protection (optional):
MTBF @ 40°C/230V (Mil-HB-217F):
Typical electrical schematic
250VAC, 50/60Hz
Standard, R and B types
dc to 400Hz
1 to 20A @ 50°C
1 to 10A (ENEC, CQC)
Cx
R
2xL
N
16A (ENEC, CQC) for 16 and 20A types
PE
1 to 20A (UL, CSA)
P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 1000VAC for 2 sec (1 to 10A types, not Z types)
P
Line
P –> N 250VAC for 2 sec (all Z types)
Z types
P –> N 1100VDC for 2 sec (16 and 20A types, not Z types)
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
Cx
2xL
N
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
(X to XX A, not Z types)
PE
UL 94V-2 or better
2kV, IEC 61000-4-5
≤15A: 3,040,000 hours
P
Line
≥16A: 2,256,000 hours
2xCy
N‘
PE
P‘
Load
2xCy
N‘
PE
P‘
Load
Features and benefits
Typical applications
The FN 9222 IEC inlet filter combines an
n Exceptional conducted attenuation
n Portable electrical and electronic
IEC inlet and mains filter with excellent filter performance, based on chokes with high
equipment
attenuation in a small form factor. Choosing
saturation resistance and excellent thermal n Small to medium-sized machines and
the FN 9222 product line brings you the rapid behavior.
household equipment
availability of a standard filter associated with n Rear/front or snap-in mounting.
n Single-phase power supplies, switch-mode
the necessary safety acceptances. Standard n Wide mounting flanges available.
power supplies
IEC connector filters are a practical solution n Optional medical versions (B type) comply n Test and measurement equipment
helping you to pass EMI system approval in
with the requirements of IEC/EN 60601-1 n Medical equipment
a short time. A wide selection on amperage
for creepage and clearance, leakage
n Rack mounting equipment
ratings, output connections, mounting
current and high potential testing.
possibilities and filters for medical applications n 12 and 15A types with hot inlet available.
are designed to offer you the desired solution. n Optional surge pulse protection.
n Different output connections offering
maximum flexibility for assembly.
n Custom-specific versions are available on
request.