FN610-6-06 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – General purpose EMI filter

General purpose EMI filter
1-phase filters
FN 610
n Rated currents from 1 to 30A
n Good overall differential and common-
mode attenuation
n Optional medical versions (B type)
n Optional safety versions (A type)
Approvals
Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
High potential test voltage:
Temperature range (operation and storage):
Flammability corresponding to:
Design corresponding to:
MTBF @ 40°C/230V (Mil-HB-217F):
250VAC, 50/60Hz
dc to 400Hz
1 to 30A @ 40°C max.
P –> E 2000VAC for 2 sec
P –> E 2500VAC for 2 sec (B types)
P –> N 760VAC for 2 sec
-25°C to +100°C (25/100/21)
UL 94V-2 or better
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
1,200,000 hours
Typical electrical schematic
R
Cx
L
P
E
N
Line
Cy
P‘
N‘
Load
Features and benefits
n FN 610 filters are designed for easy and
fast chassis mounting.
n FN 610 filters offer a perfect combination
of performance/size ratio.
n All filters provide a good symmetrical and
asymmetrical attenuation performance,
based on chokes with high saturation
resistance and excellent thermal behavior.
n General purpose filter attenuation perform-
ance suitable to be used in a broad range
of applications.
Typical applications
n Multiple terminal connections like faston n Electrical and electronical equipment
with additional spade solder possibility,
n Consumer goods
wire connection and screw connection.
n Household equipment
n Optional safety (A type) or medical (B type) n Medical equipment
versions with low leakage current.
n Office automation equipment
n FN 610 filters are also available as two-
n Datacom equipment
stage filters (FN 660, FN 670 series).
n Custom-specific versions on request.