FN410-6-02 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – High Performance Two-stage PCB-mounting EMC Filter PCB Filters FN 410

High Performance Two-stage PCB-mounting EMC Filter
PCB Filters FN 410
Rated currents from 0.5 to 6 A
High attenuation two-stage design
PCB-mountable design
Approvals
Technical specifications
Maximum continuous operating voltage
Operating frequency
Rated currents
High potential test voltage
Temperature range (operation and storage)
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/230V (Mil-HB-217F)
250 VAC, 50/60 Hz
dc to 400 Hz
0.5 to 6 A @ 40 °C max.
P –> PE 2000 VAC for 2 sec
P –> N 760 VAC for 2 sec
-25 °C to +100 °C (25/100/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94 V-2 or better
675,000 hours
The FN 410 PCB filter is a single-phase, two-stage filter
designed for easy and fast PCB-mounting. Choosing
the FN 410 product line brings you the rapid
availability of a standard high performance filter
associated with the necessary safety acceptance.
Standard PCB single-phase filters are a practical
solution helping you to pass EMI system approval in a
short time. A selection on amperage ratings are
designed to offer you the desired standard product.
Features and benefits
Very good conducted attenuation performance,
based on chokes with high saturation resistance
and excellent thermal behavior
Two-stage single-phase design
PCB through hole mounting
Custom specific versions on request
Typical applications
Electrical and electronic equipment
Small to medium-sized machines and household
equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment