FN350-8-29 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Single-phase EMC/RFI Filter for Motor Drives

Single-phase EMC/RFI Filter
for Motor Drives
1-phase Filters
FN 350
n Compact filter solution for single-phase
motor drive applications
n Industrial grade safety terminal blocks
n Designed to meet EN 55011/14/22
n Compliant with IEC 60950
Approvals
Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
High potential test voltage:
Protection category:
Overload capability:
Temperature range (operation and storage):
Flammability corresponding to:
Design corresponding to:
MTBF @ 40°C/230V (Mil-HB-217F):
1x 250VAC
dc to 400Hz
8 to 55A @ 40°C
P –> E 2000VAC for 2 sec
P –> N 1100VDC for 2 sec
IP20
4x rated current at switch on,
1.5x rated current for 1 minute, once per hour
-25°C to +100°C (25/100/21)
UL 94V-2 or better
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
420,000 hours
Typical electrical schematic
Features and benefits
n High component values optimized for com- n FN 350 also meets IEC 60950 requirements,
mon and differential-mode attenuation in
thus providing additional application
the lower frequency range makes this filter flexibility.
ideal for a large variety of single-phase
motor drive applications.
n Supplied in a relatively small housing
design with safety terminal blocks for fast
and easy installation in primarily industrial
environments.
Typical applications
n Single-phase motor drives
n Automation equipment
n Power supplies, SMPS
n Office equipment
n Testing and measurements equipment