FMC98A2200006 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508)

FM series
Snap-in rocker switches - panel cut-out 19 x 13 (.750 x .508)
Distinctive features and specifications
❑ Illuminated and non-illuminated
❑ For class II appliances
❑ VDE and UL approved
❑ Protection against moisture by double-shell case
When the switch is submitted to moisture (drops,
condensation), the double-shell case conducts the liquid
outside, thus protecting the contact area and terminals.
The light dripping inside the equipment resulting from
this should be evacuated by adequate arrangement on
back of panel.
D
❑ Protection by boot
In case of sand or splashing water, the best protection consists of insulating the rocker from
these aggressive elements. This can be achieved with transparent PVC boot U5720. Order
separately, see section H.
AGENCY APPROVALS
EN 61058-1
Availability : functions 1 and 6
Marking : approved models are standard marked.
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
Packaging unit : 150 pieces.
D-42
www.apem.com
APEM