ESRH Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Solid Polymer Aluminum SMT Capacitors

Type ESRH Solid Polymer Aluminum SMT Capacitors
Specifications
Operating Temperature Range:
Capacitance Tolerance:
Dissipation Factor (DF):
Surge Voltage:
DC Leakage Current (after 2 minutes):
Markings
Capacitance
(“R” = Decimal Point)
Lot Code
Solid Polymer Aluminum capacitors are now available
with a +125ºC temperature rating. CDE’s type ESRH
capacitors are rated at +125ºC for 1000 hours when
operated at 3/4 of the 105ºC rated voltage. Solid
Polymer Aluminum electrolytic capacitors feature
extremely low ESR which yields a capacitor with very
low high frequency impedance and high ripple current
capability. When low ESR is your requirement,
one type ESRH capacitor can replace three or more
tantalum or aluminum electrolytic capacitors. The
solid electrolyte in a polymer aluminum capacitor
results in a long (and ignition free) life, and the 7.3
x 4.3 footprint is compatible with “D” case solid
tantalum capacitors.
-55 ºC to +105 ºC at rated voltage
(+125 ºC at .75 x rated voltage)
±20% at 120 Hz and +20 ºC
≤0.10 at 120 Hz and +20 ºC
1.25 x rated voltage
I ≤ .1 CV
Polarity Stripe (Anode)
+
W.V. Code
D = 2.0V J = 6.3V
E = 2.5V K = 8.0V
G = 4.0V
Ordering Information
ESRH
101
CDE
Type
Capacitance
Code
680 = 68 µF
101 = 100 µF
M
Capacitance
Tolerance
M = ±20%
08
R
Packaging Code
WVDC Code
R = Tape & Reel 2000 pcs/reel
02 =2.0 Vdc 06 = 6.3 Vdc
0E =2.5 Vdc 08 = 8.0 Vdc
04 =4.0 Vdc
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com