ESP-125-T Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Quartz Restrike System

ESP-125-T
Quartz Restrike System
Features
• For use with HPS or Metal Halide (probe-start or pulse start) magnetic
ballasts with a 120V tap or input
• 50/60 Hz Operation
• Compact and simple to wire
• Measures the current drawn by the HID circuit rather than voltage across
the circuit allowing use with virtually any type of lamp or ballast circuit
• Operates on HID circuits from 39-1500 watts
• Operates auxiliary lamps up to 500W
• Non-arcing switches allow the ESP-125-T to be used in
Class 1, Division II vapor tight fixtures
• Can be wired directly to emergency generator power
• High temperature, flameproof plastic enclosure, 105ºC maximum
surface temp rating
• Timed Version (-T) keeps Quartz Lamp illuminated for 2-3 minutes
until HID lamp reaches 25-50% brightness
• Patent Pending
• Not for use with F-can ballasts with ignitors
The ESP-125 is a traditional 120V control that incorporates
a current sense circuit that automatically lights a quartz lamp
when the main HID lamp is extinguished. It has a built-in timer
to keep the quartz lamp on for 2-3 minutes during the HID lamp
warm-up period.
Wiring
Ignitor-based HID
277V
240V
208V
120V
Com
500W Max
Quartz Load
X1
X3 ^Ignitor
X2
HID
Lamp
Cap
White
Black
Lamp Shell
Lead
Red
Yellow
No-Ignitor HID
277V
240V
208V
120V
Com
500W Max
Quartz Load
HID
Lamp
Cap
White
Black
Lamp Shell
Lead
Red
Yellow
ESP-125 (T)
ESP-125 (T)
Dimensions
12” leads, stripped 0.63”
.75”
3.83”
1.5”
Threaded Nipple:
½”-NPS
MADE IN USA
Of Imported And Domestic Components
Specifications subject to change without notice.
Rev 7-15-14
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com