ENO-0804A3 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – specification describes the requirements of 40 watts switching power supply

_E_n_h_a_n_c_e_E_l_e_c_tr_o_n_ic_s__C_o_.,_L_T_D_________________________________________P_r_o_d_u_c_t_S_p_e_c_i_fi_c_a_ti_o_n
MODEL NO. ENO-0804A3
This specification describes the requirements of 40 watts
switching power supply .
) 1.0 INPUT REQUIREMENTS
1.1 AC input requirements
The input voltage, current, and frequency requirements for continuous
operation are stated below.
Table 1 AC Input Line Requirements
Parameter
Min
Input voltage
90
Vin Frequency
47
Input current
Nom.
100-240
50/60
Max
Unit
264
VACrms
63
Hz
1.0
Arms
Full voltage range.
1.2 Inrush current
60Amps Maximum(for 230Vac).
30Amps Maximum(for 115Vac)(at cold start).
) 2.0 OUTPUT REQUIREMENTS
2.1 Static load:
Output
1
2
3
Voltage
+5V
+12V
-12V
Minimum load Nominal load
0A
3A
0A
2.0A
0A
0.5A
Peak load
Note: Peak load of each voltage could last for up to 10 seconds.
AUDIT:__________________CHECK:____________________DESIGN:_______鄭靜_________
ENO-0804A3 SPEC REV.3.0
1 OF 4
2004/05/13