EDM2-WIZARD-START Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – microATX Form Factor Carrier Board for EDM Type 2 System-on-Modules

Wizard
edm
2
The official EDM type 2 Evaluation Carrier Board
brings you a rich variety of interfaces and options
at your fingertips.
Wide range of jumper selectable audio, video and
touch interfaces.
Optional smart battery pack implementation.
Power
5 VDC
LAN
LVDS HDMI
PCIe
x4
SATA
2nd
LPC
HDA SPDIF
CANBus
x2
SD
LVDS HDMI
PCIe SATA
x2
1^st
USB
OTG
USB
Host
I²S
1^st
UART
x2
RSVD
SPI
Buttons
x2
+ GPIO
I²C
x2
RTC
Core System
System on Module EDM Type 2 compliant
Video
External Display
2x HDMI
2 channel 18/24 bit LVDS
Touch
Controller
Connector
Jumper selectable:
TSC2046 (4 wire by SPI)
TSC2004 (4 wire by I²C)
ADS7845 (5 wire by SPI)
USB 4/5 wire touch controller
4 wire touchpanel (USB/I²C/SPI)
5 wire touchpanel (USB/SPI)
Audio
Codec
Connector
Jumper selectable:
Freescale SGTL5000 (I²S)
TI TLV320AIC23B (I²S)
Realtek ALC892-CG (HDA)
5x 3.5 mm jack Surround audio
S/PDIF
Sensors
Real Time Clock
Maxim Integrated DS1337+
Expansion and Connectivity
Expansion slots
2x mini-PCIe + SIM cardslot
(for 3G communication)
1x PCIe x1 expansion slot
1x PCIe x4 expansion slot
Ethernet
1x Gigabit LAN
USB
2x USB 3.0 Host
1x micro-USB 3.0 / 2.0 OTG
1x USB 2.0 Host
Storage
Connector
2x SATA
1x SD cardslot (SDIO)
Communication and Control
Header
2x CAN Bus
2x UART (RS-232/422/485)
2x SPI (shared with EEPROM)
2x I2C (shared with EEPROM)
LPC (Low pincount)
8x GPIO (shared with buttons)
Reserved / manufacturing pins
Power Specifications
Input power
12 VDC
or Smart Battery
microATX Form Factor Carrier Board
for EDM Type 2 System-on-Modules
USB HUB
2.0
314 pin EDM connector
PCI
x16
RS-232
RS-422
RS-485
Mechanical and Environmental
Temperature
Commercial: 0° to 60° C
Humidity
10-90%
Module Connector 314 pins MXM3
Form Factor
microATX
Dimensions
244 x 244 mm
(9⅝ x 9⅝ inch)
MTBF
>100,000 hours
Weight
380 grams
Shock
50G / 25ms
Vibration
20G / 0-600 Hz
Dimensions
units in mm
SMART
BATTERY
MODULE
5V 12V
12
VDC
Input
243,84
Ordering Information
EDM2-WIZARD-START
EDM Type 2 Evaluation board including cablekit and adaptor
The Wizard design files including schematics and gerber files are available to design your own EDM Carrier Board.